Is that a 30mm wrench in your pocket, or are you just angry to see me? Chris -- J. Christopher Krok, Ph.D. Big Cee Engineering KLR650 Accessories and home of the FAQ> 1a. Re: 30mm wrench on KLR > Posted by: "Jim Douglas" james.douglas@... > pinkfloyd43 > Date: Sat Dec 5, 2009 4:44 am ((PST)) > > In your pocket to throw at car's that cut you off!
speedo
-
J. Christopher Krok
- Posts: 108
- Joined: Wed May 03, 2006 4:52 am
30mm wrench on klr nklr
-
Tengai Mark Van Horn
- Posts: 1922
- Joined: Tue Nov 19, 2002 8:31 pm
30mm wrench on klr nklr
At 5:12 AM -0800 12/6/09, J. Christopher Krok wrote:
Forget the 30mm wrench. I want a 30yr wench on my KLR! Mark> >Is that a 30mm wrench in your pocket, or are you just angry to see me?
-
Steve
- Posts: 212
- Joined: Wed May 18, 2005 6:47 pm
30mm wrench on klr nklr
Ok, the 30mm wrench idea is out the door. Thanks all of you
for the knowledge and wit,
I'm now in the market for a 30 yr wench!
Do they make one of those that can "change"
a front sprocket on my 2005? 
Steve B.
A19
Tengai Mark Van Horn wrote:
Steve B.
A19
Tengai Mark Van Horn wrote: Forget the 30mm wrench. I want a 30yr wench on my KLR! Mark
-
Fred Hink
- Posts: 2434
- Joined: Thu Apr 06, 2000 10:08 am
30mm wrench on klr nklr
They broke the mold after Jennifer. Too bad, she was a good one. Fred
----- Original Message ----- [b]From:[/b] chicobro@... [b]To:[/b] DSN_KLR650@yahoogroups.com [b]Sent:[/b] Sunday, December 06, 2009 12:07 PM [b]Subject:[/b] Re: [DSN_KLR650] Re: 30mm wrench on KLR NKLR Ok, the 30mm wrench idea is out the door. Thanks all of you for the knowledge and wit, I'm now in the market for a 30 yr wench! Do they make one of those that can "change" a front sprocket on my 2005? :-) Steve B. A19 Tengai Mark Van Horn wrote: Forget the 30mm wrench. I want a 30yr wench on my KLR! Mark
-
revmaaatin
- Posts: 1727
- Joined: Wed Nov 26, 2003 3:07 pm
30mm wrench on klr nklr
Indeed it must have been a sad, sad day when the KLR community suffered Jennifer's loss.
All before my time.
But back to the original post-
Ah, the value of wit and humor played across the grain of the spoken English language and the [now frozen] humanity of our KLR.
Go back and read Mark's post--without reading words that he did not write.
If you read Mark's post carefully, it is not as it seems.
Mark is asking for a 30year wench, not a 30year-old pillion.
of course, I could be wrong. as this is slightly outside the pale of KLR liberation theology. as preached by revjeremiahwright. shrug.
revmaaatin. who just reads em' like they are written. and smiles.
--- In DSN_KLR650@yahoogroups.com, "Fred Hink" wrote: > > They broke the mold after Jennifer. > Too bad, she was a good one. > > Fred > > ----- Original Message ----- > From: Steve > To: DSN_KLR650@yahoogroups.com > Sent: Sunday, December 06, 2009 12:07 PM > Subject: Re: [DSN_KLR650] Re: 30mm wrench on KLR NKLR > > > Ok, the 30mm wrench idea is out the door. Thanks all of you > for the knowledge and wit, > I'm now in the market for a 30 yr wench! > Do they make one of those that can "change" > a front sprocket on my 2005?
-
Steve
- Posts: 212
- Joined: Wed May 18, 2005 6:47 pm
30mm wrench on klr nklr
Dang it! I feel bad now! And all I did was ask for a wrench *size* and now it's brought up
all this....sadness.....or am I *still* out of the loop?
Should I have used the word *socket* instead of *sprocket*?
I know I'll have trouble using the word *wrench* again in my life,
unless she begs me........ =-O
Steve B
A19
revmaaatin wrote:
Indeed it must have been a sad, sad day when the KLR community suffered Jennifer's loss.
-
SM
- Posts: 73
- Joined: Mon Sep 21, 2009 5:43 pm
30mm wrench on klr nklr
--- In DSN_KLR650@yahoogroups.com, "Fred Hink" wrote:
Thanks
CA Stu A13
The list will never be the same. Didn't she blow a tranny or something? Which brings me to my next question: If BMW made an XChallenge with a full set of hard luggage, could they sell it as the BMW X-Dresser? How would we tell it apart from the average GS owner???> > They broke the mold after Jennifer. > Too bad, she was a good one. > > Fred >
Thanks
CA Stu A13-
Jud
- Posts: 570
- Joined: Tue Sep 22, 2009 7:52 pm
30mm wrench on klr nklr
--- In DSN_KLR650@yahoogroups.com, "SM" wrote:
Why would you want to?> > > > If BMW made an XChallenge with a full set of hard luggage, could they sell it as the BMW X-Dresser? > > How would we tell it apart from the average GS owner??? > >
-
Randall Marbach
- Posts: 404
- Joined: Sat Oct 18, 2003 6:57 pm
30mm wrench on klr nklr
Just when you think you are finally over something, somebody goes ahead and brings up that blond, blue-eyed angel Jennifer again.
RIP Jennifer...
Damned Fish Taco Trucks.
Randy from Burbank
aka MrInvisible
[b]From:[/b] SM
[b]To:[/b] DSN_KLR650@yahoogroups.com
[b]Sent:[/b] Mon, December 7, 2009 10:58:40 AM
[b]Subject:[/b] [DSN_KLR650] Re: 30mm wrench on KLR NKLR
--- In DSN_KLR650@yahoogroups.com, "Fred Hink" wrote: > > They broke the mold after Jennifer. > Too bad, she was a good one. > > Fred > The list will never be the same. Didn't she blow a tranny or something? Which brings me to my next question: If BMW made an XChallenge with a full set of hard luggage, could they sell it as the BMW X-Dresser? How would we tell it apart from the average GS owner???
-
Rick McCauley
- Posts: 526
- Joined: Mon Feb 14, 2005 1:28 pm
speedo
I am just glad the KLR wasn't here to read this. It has feeling ya know.. Rick A17
[b]From:[/b] fasteddiecopeman
[b]To:[/b] DSN_KLR650@yahoogroups.com
[b]Sent:[/b] Mon, December 7, 2009 1:43:39 PM
[b]Subject:[/b] [DSN_KLR650] Re: speedo
Rick,
Undesirable as it is, I'm willing to give you $190.47 for it...! ;>)
Ed
--- In DSN_KLR650%40yahoogroups.com, Rick McCauley wrote: > > I was at a "Kawasaki" dealershipa couple weeks ago. Just out of curiosity I started to ask about trading my KLR, which is in excellent shape. I was told by the owner my KLR was an undesirable motorcycle because it has 21,000 miles on it. > > Rick > A17
Who is online
Users browsing this forum: No registered users and 16 guests