I was wondering if theres any Helmet radios somewhere.I was wondering if I could just buy a radio headset and fit it into the helmet.Anyone got a helmet with a radio in it? All I want is to just listen to music not a cb or anything else.
assymetric rotor holes
-
- Posts: 48
- Joined: Thu Apr 06, 2000 6:08 pm
is there a good helmet radio set
I have Collett Electronics' Bass Monster's. They are located in Winnipeg,
Canada I think. I have 2 sets 1-ARAI Quantum, 1-Beiffe MX-300. I know
Aerostich sells them too. I just a standard Walkman. I prefer Panasonic over
Sony just because the headset jack solder joints seem to last longer. And I
don't work for any of these companies. For boosting the output try the
boostaroo in the Aerostich catalog. I bought mine at WALMART in 1997 or do.
Since I fly for a living in loud Naval aircraft I cannot say it enough wear
earplugs!!!! We also have radio sets and when using earplugs the audio comes
through but the noise of the aircraft does not. Try it, it also cuts way
down on the wind noise.
Kurt Thomas
Welcome to the Thomas Homepage
-
- Posts: 1897
- Joined: Fri Apr 28, 2000 7:50 am
is there a good helmet radio set
Brett- You may want to check out Koss' THE PLUG... They are earplug style headphones... check out http://www.headwize.com/projects/cmoy4_prj.htm this describes modding them to fit your fav earplugs. These hit some of the beeg touring bike lists awhile ago, and people seem to like them once they fit them to their favorite earplugs. If I ever go music route on my ride, I will probably use these as it doesn't make sense to wear earplugs and have to have the speakers cranked up to hear them over the earplugs. These are relatively inexpensive as well, about $19.95 if I remember correctly. Reports of vast sound improvement after the mod have been heard. Haven't heard much about the sound at 70mph+, but perhaps this might be the solution for you... If you do go this route please let me know, I would be interested to hear how it works out.
----
Zack
SE DC
1991 KLR650 "Buster"
1986 Concours
[/quote][quote] -----Original Message----- [b]From:[/b] brett wolcott [mailto:strangeintruder@...] [b]Sent:[/b] Monday, January 15, 2001 1:25 PM [b]To:[/b] DSN_KLR650@egroups.com [b]Subject:[/b] [DSN_klr650] IS THERE A GOOD HELMET RADIO SET I was wondering if theres any Helmet radios somewhere.I was wondering if I could just buy a radio headset and fit it into the helmet.Anyone got a helmet with a radio in it? All I want is to just listen to music not a cb or anything else. Visit the KLR650 archives at http://www.listquest.com/lq/search.html?ln=klr650 Support Dual Sport News... dsneditor@... Let's keep this list SPAM free! Visit our site at http://www.egroups.com/group/DSN_klr650 To unsubscribe from this group, send an email to: DSN_klr650-unsubscribe@egroups.com
-
- Posts: 16
- Joined: Mon Apr 10, 2000 11:04 pm
is there a good helmet radio set
I found a pair at Equinox Motorcycle.I like the speakers for the helmets on this sight.But the price is in UK money.I emailed them for American price but havent had a reply yet.The one guy said to go CD player and with speakers.It made sence.I didnt want wires hanging down but probably will have to go that route.And the headphones wouldnt have been loud enough that far from my ear....Thanks for the help all.
[/quote]----- Original Message ----- [b]From:[/b] zmully@... [b]To:[/b] strangeintruder@... ; DSN_KLR650@egroups.com [b]Sent:[/b] Tuesday, January 16, 2001 10:41 AM [b]Subject:[/b] RE: [DSN_klr650] IS THERE A GOOD HELMET RADIO SET Brett- You may want to check out Koss' THE PLUG... They are earplug style headphones... check out http://www.headwize.com/projects/cmoy4_prj.htm this describes modding them to fit your fav earplugs. These hit some of the beeg touring bike lists awhile ago, and people seem to like them once they fit them to their favorite earplugs. If I ever go music route on my ride, I will probably use these as it doesn't make sense to wear earplugs and have to have the speakers cranked up to hear them over the earplugs. These are relatively inexpensive as well, about $19.95 if I remember correctly. Reports of vast sound improvement after the mod have been heard. Haven't heard much about the sound at 70mph+, but perhaps this might be the solution for you... If you do go this route please let me know, I would be interested to hear how it works out. ---- Zack SE DC 1991 KLR650 "Buster" 1986 Concours [quote] -----Original Message----- [b]From:[/b] brett wolcott [mailto:strangeintruder@...] [b]Sent:[/b] Monday, January 15, 2001 1:25 PM [b]To:[/b] DSN_KLR650@egroups.com [b]Subject:[/b] [DSN_klr650] IS THERE A GOOD HELMET RADIO SET I was wondering if theres any Helmet radios somewhere.I was wondering if I could just buy a radio headset and fit it into the helmet.Anyone got a helmet with a radio in it? All I want is to just listen to music not a cb or anything else. Visit the KLR650 archives at http://www.listquest.com/lq/search.html?ln=klr650 Support Dual Sport News... dsneditor@... Let's keep this list SPAM free! Visit our site at http://www.egroups.com/group/DSN_klr650 To unsubscribe from this group, send an email to: DSN_klr650-unsubscribe@egroups.com
-
- Posts: 215
- Joined: Mon Aug 28, 2000 2:09 pm
is there a good helmet radio set
Hi Brett: I have a 40 second anti-skip personal portable CD-AM-FM Radio. It
and the mini speakers are rechargeable battery operated. The speakers are for
campsite sharing of music, in case I meet any girls who want to party. I have
earbuds for personal listening pleasure on or off the bike and a neoprene
fanny pack sort of carrier. I have the capability to recharge all sizes of
Nickel Metal Hydride batteries from 12v DC, 120v AC or 220v AC. I like music.
Lew Waterman
Punky & Lew's Americas Motopaseo
Greenacres, Florida
A-14 "Critter"
-
- Posts: 50
- Joined: Thu Oct 26, 2000 3:35 pm
assymetric rotor holes
Hello friends,
It is my understanding (from working on racecars and bikes etc..
FWIW) That drilled brake rotors are done for 3 reasons.
1. To prevent dust buildup between the pad and rotor during heavy
braking.
2. To facilitate cooling of the brake rotor (more surface area)
3. To reduce the rotating mass of the rotor (stops quicker? but I
doubt by vary much considering the weight of the tire and rim
compared to the small amount of material removed by the holes)
The holes are drilled assymetrically to reduce weak spots in the
rotor that would allow cracking. If you drilled 3 holes directly
across the radius you would have very little material left in that
small cross section. Many of the performance brake suppliers
Wildwood, etc are no longer drilling all the way through their
rotors. They are just making small dimples which gives the same
benefits. They also make these dimples in an assymetrical pattern.
Just my 4 1/2 cents worth.
Jody
A15 "skruffy"
Who is online
Users browsing this forum: No registered users and 19 guests