We will be closed to attend GoF West in Napa,Ca. from the 18th of June until the 22nd of June.>Hi Chris, > >No one has responded to your query. About ten years ago I didn't like the >length (slightly too long for my liking) of replacement fan belts because >they required the dynamo to be pulled out quite far. I ended up finding a >suitable belt (same cross section) at a local tractor and farm implement >dealer, same place I found a great air filter to replace the "steel >wool". As I recall it is made by the Gates Co., is green in color, and >incorporates many more layers of textile, ostensibly to make it more heavy >duty. It is used on industrial grade lawn mowers. My TC is some miles >from my home, but if needed I will try to obtain the part number. > >Bottom line, don't limit yourself to auto parts. > >Cheers, Peter >-----Original Message----- >From: Chris Blood esq. [mailto:cblood@thebloods.fsnet.co.uk] >Sent: Sunday, June 17, 2001 2:25 PM >To: mg-tabc@yahoogroups.com >Subject: [mg-tabc] Alternative Fan belts for a TC? > >Can anyone tell me what alternative Fan Belts you can use on a TC? >Like, something on the British market shelf. >Incidentally, what is the spec for a TC? The length, depth and width etc? > >Regards. >Chris Blood - TC 2686 >Notts, England > >Your use of Yahoo! Groups is subject to the >http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service. > > >Your use of Yahoo! Groups is subject to the >http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
IM ON VACATION!!! (was RE: [mg-tabc] Alternative Fan belts for a TC
-
- Posts: 153
- Joined: Thu Dec 30, 1999 2:57 am
IM ON VACATION!!! (was RE: [mg-tabc] Alternative Fan belts for a TC
Peter:
The belt to use, which is correct, is Goodyear "high miler" #22394. This
belt is correct in all aspects. It is a cogged belt, and will last a long
time. The one on my car has been on the car for over 30 years, and is still
in good condition. It is the correct length.
I special order these belts from Goodyear. They supplied the part no. from
there old specs from long ago.as being correct for the T types.
Skip Kelsey...........................
At 09:58 AM 6/18/01, Peter Pleitner wrote:
-
- Posts: 147
- Joined: Tue Mar 20, 2001 12:35 am
IM ON VACATION!!! (was RE: [mg-tabc] Alternative Fan belts for a TC
Message text written by Skip Kelsey
belt is correct in all aspects. It is a cogged belt,>The belt to use, which is correct, is Goodyear "high miler" #22394. This
Who is online
Users browsing this forum: No registered users and 12 guests