parts question.........kroil

[revmaaatin]

--- In DSN_KLR650@yahoogroups.com, Kevin Powers wrote:

> > I'll give you the non-engineer answer - buy a winch. > http://www.cjdesignsllc.com/about-us/brands/1137-2/ >

That looks like a nice piece of gear. cough. Oh, Yeah, how well will that work on the KLR subframe. wink. and the itsy bitsy battery. shrug. revmaaatin. who is a tad skeptikal.

[Desert Datsuns]

I'll second using Kroil. It's very good stuff. You'll have to order it, but it's worth the money, and nice to have around. It's the best that I've used yet. I got the pro-tip form guys at an electrical generation plant a few years ago. Ryan Phoenix, AZ Jeff Saline wrote:

> > > On Sun, 27 Jan 2013 18:20:20 -0800 (PST) mark ward > nomad59@... > writes: > > I can NOT get my shield bolts to loosen. > > > > Didn't try REAL hard I didn't want to snap them. > > > > They are a little loose (FROZEN in place) so the sheild would rattle > > if I didn't have a hose clamp on it. > <><><><><><> > <><><><><><> > > Mark, > > Maybe soak the bolts with some Kroil penetrating oil. A couple of heat > cycles and soakings with the Kroil and then use of a hand impact and mid > size hammer should loosen or break the bolts. If they break you can then > try to drill them out or grind off the nuts and weld new nuts to the > header pipe. > > Kroil is available from KANO Laboratory in Kentucky or maybe a local > machine supply shop or gunsmith. > > Best, > > Jeff Saline > ABC # 4412 South Dakota Airmarshal > Airheads Beemer Club www.airheads.org > The Beautiful Black Hills of South Dakota > 75 R90/6, 03 KLR650 > > . > . > __________________________________________________________ > Woman is 53 But Looks 25 > Mom reveals 1 simple wrinkle trick that has angered doctors... > http://thirdpartyoffers.juno.com/TGL3141/5105e3185ca43631843ddst02vuc > > > > No virus found in this message. > Checked by AVG - www.avg.com http://www.avg.com> > Version: 2012.0.2221 / Virus Database: 2639/5563 - Release Date: 01/28/13 >