parts from 07 & 11 ??

[Skypilot]

The motor mounts are the same as far as I know but the crash bars are shaped differently to fit around the tank if you have the full bars. The little foot peg bar/crash bar like Whitehorse sells is the same but the uppers are way different. The Skid Plate requires a little metal block. Up until 07 the KLR had a metal bracket on the frame that held the skid plate out about an inch from the frame's front member. That bracket isnt there on 08+ so you put the little block between the frame and skid plate capturing it withthe U bolt. The front U bolt is the same. I will try to get a picture of the block later today and put a link up

--- In DSN_KLR650@yahoogroups.com, David Nichols wrote: > > Seat: Yes, but you need to remove a metal bracket that attaches to the gas tank, drill out the 2 rivets that hold this on the pan and be sure to push the rivet heads into the seat foam so they don't scratch your tank. > Skid Plate: Yes for a Happy Trail style skid plate (with a longer U bolt), but I don't know about SW Motech. > Crash Bars: I don't think any brand will fit, the newer generations are very different in this area... > > -David > > > ________________________________ > From: mark ward > To: List KLR DSN_KLR650@yahoogroups.com> > Sent: Tuesday, November 13, 2012 8:38 AM > Subject: [DSN_KLR650] Parts from 07 & 11 ?? > > > > Will the seat, motec crash bar & skid plate from a 2011, fit on an 07?? > > [Non-text portions of this message have been removed] > > > > > [Non-text portions of this message have been removed] >