[bulk] [dsn_klr650] garrage door? (non-klr)

[greg coyle]

yes, as the sun is changing its path it will affect the sensors. try re-aligning them...

On 8/31/2012 6:29 PM, Horton Oliphant wrote: > Don't rule out the sensors. I installed a new opener and everything > worked fine. The next morning it had the same behavior as yours, I > almost took it back to the store. I messed around and found the sensors > were just out of alignment. It would work at night but not during the > day. I realigned the sensors and then it worked fine. > > Alan Henderson A13-hacked Iowa > > On 8/31/2012 1:21 PM, mark ward wrote: > > > > Hey All > > Whos are automatic garrage door opener guy? > > > > The door does not close, it starts to then stops, as if something is > > in the path. > > > > BUT when I unlatch it, Close it by hand, (And it works smoothly) then > > hit the button it operates ok. (I can not, assist it in closing while > > attached) > > > > IF, there was something in the path, OR the sensor's were out of > > alignment, it would NOT EVER close, even when I detach it and close by > > hand first. So the sensor's, can not be an issue. > > > > I do have it adjusted to MAX closing Pressure. > > > > Mark (West Mi.) > > > > [Non-text portions of this message have been removed] > > > > > > [Non-text portions of this message have been removed] > >