camping near tail of dragon???

[Michael Martin]

Blue Ridge Motorcycle Campground is a nice place, too. http://www.blueridgemotorcyclecamp.com/ Mike Martin, Louisville, KY ________________________________ From: mark ward To: List KLR DSN_KLR650@yahoogroups.com> Sent: Tuesday, July 17, 2012 9:12 AM Subject: [DSN_KLR650] Camping near tail of dragon??? Hey all I',m In NC (near hickory) Whos been here and knows best places to camp?? (tent) [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

[D Critchley]

I tried to print the tool list that was sent in about a week ago, because mine has too much junk. In the process I managed to erase the letter, and also, fail to print it. If anyone still has it, could you bounce it off in this direction please. Thanks in advance, DC -- DC

[Ron Haraseth]

Reprint: 30mm would be for the Eagle Mike prevailing torque nut. 13mm fits a lot of the aftermarket bolt-ons, but nothing on the stock bike. Here is my MacGuyver kit for the KLR, hope I remembered everything: # 10, 12, 13 and 14mm Combination wrenches # PowerBuilt Extendable 3/8" drive ratchet # 6" 3/8" drive extension # 6" 3/8" drive wobble extension # 8, 10, 12, 13, 14, 17 and 19mm 3/8" drive sockets # 4, 5 and 6mm Allen sockets # 1/2" to 3/8" drive adaptor. # 27mm 1/2" drive deep socket # 1 3/16" (or 30mm) 1/2" drive socket (for the Eagle Mike prevailing torque nut) # A medium-quality multi-tool # Pliers # Spoke wrench # Spark Plug socket # LED flashlight and extra batteries # Tube patch kit # 3 tire irons # 4-way screwdriver # 8oz. bottle of Windex # 6oz bottle of "Bubble Fluid" (For tire lubricant, hand washing) # 4oz applicator bottle of gear oil (chain lube) # A quart of oil # Valve core tool # Tire pressure gauge Plus or minus: # Compact 12v compressor # Cargo net # A couple of rags # Cell phone charger -Jeff Khoury -----Original Message----- From: D Critchley Sent: Thursday, July 19, 2012 1:55 PM To: DSN_KLR650@yahoogroups.com Subject: [DSN_KLR650] Tool List from a week ago. I tried to print the tool list that was sent in about a week ago, because mine has too much junk. In the process I managed to erase the letter, and also, fail to print it. If anyone still has it, could you bounce it off in this direction please. Thanks in advance, DC -- DC ------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Member Map: http://groups.yahoo.com/group/DSN_KLR650/app/peoplemap/view/map Group Apps: http://groups.yahoo.com/group/DSN_KLR650/grouplets/subscriptionsYahoo! Groups Links

[D Critchley]

Thanks for the prompt response. I can perhaps get a grip on my way too ambitious list. DC

On 19/07/2012 14:55, Ron Haraseth wrote: > Reprint: > > > 30mm would be for the Eagle Mike prevailing torque nut. 13mm fits a lot of > the aftermarket bolt-ons, but nothing on the stock bike. > > Here is my MacGuyver kit for the KLR, hope I remembered everything: > > # 10, 12, 13 and 14mm Combination wrenches > # PowerBuilt Extendable 3/8" drive ratchet > # 6" 3/8" drive extension >

[RobertWichert]

Don't forget the essentials: 1) Sink, Kitchen 2) Bidet 3) ATM Machine Robert Wichert P.Eng. LEED AP BD&C +1 916 966 9060 FAX +1 916 966 9068 ===============================================

On 7/19/2012 5:34 PM, D Critchley wrote: > > Thanks for the prompt response. I can perhaps get a grip on my way too > ambitious list. > > DC > On 19/07/2012 14:55, Ron Haraseth wrote: > > Reprint: > > > > > > 30mm would be for the Eagle Mike prevailing torque nut. 13mm fits a > lot of > > the aftermarket bolt-ons, but nothing on the stock bike. > > > > Here is my MacGuyver kit for the KLR, hope I remembered everything: > > > > # 10, 12, 13 and 14mm Combination wrenches > > # PowerBuilt Extendable 3/8" drive ratchet > > # 6" 3/8" drive extension > > > > [Non-text portions of this message have been removed]

[D Critchley]

You forgot an anvil and a 6'' vise. DC

On 19/07/2012 19:17, RobertWichert wrote: > Don't forget the essentials: > > 1) Sink, Kitchen > 2) Bidet > 3) ATM Machine > > > > Robert Wichert P.Eng. LEED AP BD&C > +1 916 966 9060 > FAX +1 916 966 9068 > > > > > > > > =============================================== > On 7/19/2012 5:34 PM, D Critchley wrote: >> >> Thanks for the prompt response. I can perhaps get a grip on my way too >> ambitious list. >> >> DC >> On 19/07/2012 14:55, Ron Haraseth wrote: >> > Reprint: >> > >> > >> > 30mm would be for the Eagle Mike prevailing torque nut. 13mm fits a >> lot of >> > the aftermarket bolt-ons, but nothing on the stock bike. >> > >> > Here is my MacGuyver kit for the KLR, hope I remembered everything: >> > >> > # 10, 12, 13 and 14mm Combination wrenches >> > # PowerBuilt Extendable 3/8" drive ratchet >> > # 6" 3/8" drive extension >> > >> >> > > [Non-text portions of this message have been removed]

[Ed Rockefeller]

>________________________________ > From: D Critchley > >You forgot an anvil and a 6'' vise. > >DC

heh. was out on some single track with a good friend of mine and there was a tree across the trail. it was huge. the geography of the land around it was such that there was really no "sane" way to bypass it. had no chainsaw and even if we had it would have took a WHILE since it was in excess of 3' diameter and about 15' or so long. however, while it was lying on the ground on the right side of the trail, on the left side it was high enough that we could drag the bikes (my KLR and his KLX250) under it. we did his first as it was lighter and we could easily figure out how do-able it would be to drag mine. his was no problem. so we tried dragging mine. mine being bulkier and heavier drug a bit more. enough so, that once on the other side of the tree, i noticed we had bent my shifter peg. grabbed my tools, pulled the peg and used one rock as an anvil and another as a hammer (chimp-style) to pound it straight enough to be able to get it back to the campground where we were staying (where there was a vice handy). sometimes you can find the tools you need in the field if you're creative and lucky. it's always an adventure ed rock newport, tn 09 klr650 (Ms.Chif) 07 gsf1250s (Cloud9) 01 gsf600s (Pearl) 84 vf750f " the shortest distance between two points is a straight line, but that doesn't appeal to us riders anyway" -- Ted Dorsey

[revmaaatin]

ah, no. the bidet is #1. revmaaatin.

--- In DSN_KLR650@yahoogroups.com, RobertWichert wrote: > > Don't forget the essentials: > > 1) Sink, Kitchen > 2) Bidet > 3) ATM Machine > > > > Robert Wichert P.Eng. LEED AP BD&C > +1 916 966 9060 > FAX +1 916 966 9068 > > > > > > > > =============================================== > > On 7/19/2012 5:34 PM, D Critchley wrote: > > > > Thanks for the prompt response. I can perhaps get a grip on my way too > > ambitious list. > > > > DC > > On 19/07/2012 14:55, Ron Haraseth wrote: > > > Reprint: > > > > > > > > > 30mm would be for the Eagle Mike prevailing torque nut. 13mm fits a > > lot of > > > the aftermarket bolt-ons, but nothing on the stock bike. > > > > > > Here is my MacGuyver kit for the KLR, hope I remembered everything: > > > > > > # 10, 12, 13 and 14mm Combination wrenches > > > # PowerBuilt Extendable 3/8" drive ratchet > > > # 6" 3/8" drive extension > > > > > > > > > > > > [Non-text portions of this message have been removed] >

[revmaaatin]

I'm pretty sure that is in Criswell's or Judds left saddle bag. Well, that is where I left it two weeks ago. revmaaatin.

--- In DSN_KLR650@yahoogroups.com, D Critchley wrote: > > You forgot an anvil and a 6'' vise. > > DC > > > On 19/07/2012 19:17, RobertWichert wrote: > > Don't forget the essentials: > > > > 1) Sink, Kitchen > > 2) Bidet > > 3) ATM Machine > > > > > > > > Robert Wichert P.Eng. LEED AP BD&C > > +1 916 966 9060 > > FAX +1 916 966 9068 > > > > > > > > > > > > > > > > =============================================== > > On 7/19/2012 5:34 PM, D Critchley wrote: > >> > >> Thanks for the prompt response. I can perhaps get a grip on my way too > >> ambitious list. > >> > >> DC > >> On 19/07/2012 14:55, Ron Haraseth wrote: > >> > Reprint: > >> > > >> > > >> > 30mm would be for the Eagle Mike prevailing torque nut. 13mm fits a > >> lot of > >> > the aftermarket bolt-ons, but nothing on the stock bike. > >> > > >> > Here is my MacGuyver kit for the KLR, hope I remembered everything: > >> > > >> > # 10, 12, 13 and 14mm Combination wrenches > >> > # PowerBuilt Extendable 3/8" drive ratchet > >> > # 6" 3/8" drive extension > >> > > >> > >> > > > > > > > [Non-text portions of this message have been removed] >