is carb on 2008/2009 the same as earlier carbs?

DSN_KLR650
Post Reply
Eddie
Posts: 472
Joined: Sat Jun 03, 2000 9:42 am

+1 for "eagle mike" cowlishaw

Post by Eddie » Thu Mar 29, 2012 2:12 pm

I ordered a subframe bolt upgrade kit from EagleMike.com after midnight Monday night. The order was processed Tuesday and I have the parts in hand today, two days later: San Diego,CA to Columbus, GA in 48 hours. COOL!! Now, if I was only off work, I'd could go tinker a bit. =) Guess it's time to charge up the big Craftsman drill batteries. eddie [Non-text portions of this message have been removed]

Bill Kinnison
Posts: 24
Joined: Thu Jan 05, 2012 12:30 pm

+1 for "eagle mike" cowlishaw

Post by Bill Kinnison » Thu Mar 29, 2012 3:06 pm

Good luck using a cordless on that job. The center section of the front subframe is probably 2" or 3" thick. - Bill _____ From: DSN_KLR650@yahoogroups.com [mailto:DSN_KLR650@yahoogroups.com] On Behalf Of eddie Sent: Thursday, March 29, 2012 12:12 PM To: KLR650 list Subject: [DSN_KLR650] +1 for "Eagle Mike" Cowlishaw I ordered a subframe bolt upgrade kit from EagleMike.com after midnight Monday night. The order was processed Tuesday and I have the parts in hand today, two days later: San Diego,CA to Columbus, GA in 48 hours. COOL!! Now, if I was only off work, I'd could go tinker a bit. =) Guess it's time to charge up the big Craftsman drill batteries. eddie [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

Eddie
Posts: 472
Joined: Sat Jun 03, 2000 9:42 am

+1 for "eagle mike" cowlishaw

Post by Eddie » Thu Mar 29, 2012 3:11 pm

Thanks for the heads-up, Bill! =) Living in an apartment makes having cordless tools a necessity. Have a corded backup drill, thankfully. eddie
> [Original Message] > From: Bill Kinnison > To: ; KLR650 list DSN_KLR650@yahoogroups.com> > Date: 3/29/2012 4:06:22 PM > Subject: RE: [DSN_KLR650] +1 for "Eagle Mike" Cowlishaw > > Good luck using a cordless on that job. The center section of the front > subframe is probably 2" or 3" thick. > - > Bill > > http://docs.yahoo.com/info/terms/ >

Jeff Saline
Posts: 2246
Joined: Fri Oct 10, 2003 6:02 pm

is carb on 2008/2009 the same as earlier carbs?

Post by Jeff Saline » Fri Mar 30, 2012 9:42 am

On Fri, 30 Mar 2012 13:01:02 -0000 "Steve" writes:
> I'm thinking of replacing the carb body on my 2006 and see that there > are a couple of 2008/2009 carbs for sale on Ebay. Are these carbs > the same as the 2006?
<><><><><> <><><><><> Steve, As far as I know they are identical. What happened that you need to swap bodies? Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650 . . ____________________________________________________________ 53 Year Old Mom Looks 33 The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried http://thirdpartyoffers.juno.com/TGL3141/4f75c60517c612b39d1fst01vuc

Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests