tw200 valves nklr

[judjonzz]

That's at least as good a guess as mine. I just fix on the one because it happened to me.

--- In DSN_KLR650@yahoogroups.com, WEST HOVLAND wrote: > > > Sticky valve, broken valve spring, something stuck in the valve seat? The valve is probably not closing all the way, loosing compression and stalling at slow speeds. > > > > Just a guess, good luck. > > > > West > > > > > > > > I purchased a 1990 tw200 over the weekend that had a valve tapping noise. Opon investigation, I found the intake valve tappet gap was way to large. I adjusted to within spec, and after a half hour of riding the noise was back, the bike would stall at idle, and the gap was again to large. I'm about out of adjustment on the adjuster screw. Any ideas on whats causing this? > > > > Craig Kahler > > > > > > [Non-text portions of this message have been removed] >