noab 2008 ?

DSN_KLR650
Post Reply
loudicks
Posts: 13
Joined: Wed Jun 28, 2006 4:59 pm

nklr - 1973 yamaha ct 175 enduro - help!

Post by loudicks » Tue Jul 08, 2008 7:13 pm

Just got a baby brother for the KLR, a beat up but rideable CT175. I need to know what kind of oil to put in the gear box and can't find a manual for this bike. Any ideas? Also, it's missing a couple of spokes. I've never had to replace spokes before and have no idea where I'd go to get some for this old of bike. Any suggestions?

Ed Dobson
Posts: 102
Joined: Mon Nov 05, 2007 6:50 am

nklr - 1973 yamaha ct 175 enduro - help!

Post by Ed Dobson » Tue Jul 08, 2008 8:44 pm

--- In DSN_KLR650@yahoogroups.com, "loudicks" wrote:
> > Just got a baby brother for the KLR, a beat up but rideable CT175. > I need to know what kind of oil to put in the gear box and can't find > a manual for this bike. Any ideas? > Also, it's missing a couple of spokes. I've never had to replace > spokes before and have no idea where I'd go to get some for this old > of bike. Any suggestions? >
The common gearbox oil of that era was 20W-40 motor oil(any two-stroke gearbox oil will probably do). Yamaha currently sells the following: http://www.yamaha-motor.com/sport/apparel/apscitemdetail/3/122/all/1/1579/detail.aspx The Yamaha site has parts catalogs for several 1973 models, including a CT3. You can get parts numbers and try the dealer or the internet, e.g., ronayers.com. Also, wheel specialists will probably be helpful. http://www.yamaha-motor.com/sport/service/servicehome/home.aspx ED

David Critchley
Posts: 282
Joined: Tue Oct 03, 2000 1:11 pm

nklr - 1973 yamaha ct 175 enduro - help!

Post by David Critchley » Wed Jul 09, 2008 4:27 pm

I have a 1980 DT 175, and had no trouble getting a Cylmer manual for it. Hope that helps. DC
----- Original Message ----- From: Ed Dobson Date: Tuesday, July 8, 2008 19:45 Subject: [DSN_KLR650] Re: NKLR - 1973 Yamaha CT 175 Enduro - HELP! To: DSN_KLR650@yahoogroups.com > --- In DSN_KLR650@yahoogroups.com, "loudicks" wrote: > > > > Just got a baby brother for the KLR, a beat up but rideable CT175. > > I need to know what kind of oil to put in the gear box and > can't find > > a manual for this bike. Any ideas? > > Also, it's missing a couple of spokes. I've never had to replace > > spokes before and have no idea where I'd go to get some for > this old > > of bike. Any suggestions? > > > > > > The common gearbox oil of that era was 20W-40 motor oil(any two-stroke > gearbox oil will probably do). Yamaha currently sells the following: > > http://www.yamaha- > motor.com/sport/apparel/apscitemdetail/3/122/all/1/1579/detail.aspx > > The Yamaha site has parts catalogs for several 1973 models, including > a CT3. You can get parts numbers and try the dealer or the internet, > e.g., ronayers.com. Also, wheel specialists will probably be > helpful. > > http://www.yamaha-motor.com/sport/servi ... /home.aspx > > ED > > > > D Critchley [Non-text portions of this message have been removed]

Horton Oliphant
Posts: 184
Joined: Fri Jan 25, 2008 11:43 am

noab 2008 ?

Post by Horton Oliphant » Wed Jul 09, 2008 5:02 pm

Same reason I didn't make it to Moab this year. Alan Tengai Mark Van Horn wrote:
> > I think I'm going to skip organizing NOAB this year. I've been on > the fence but... Although I think Bob Vila is a whore, I really need > to spend time taking care of a neglected house this summer, and NOAB > is one distraction I can trim from the schedule. > > Mark >

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests