rear motion-pro rim lock size?

DSN_KLR650
Post Reply
RM
Posts: 1977
Joined: Tue May 09, 2000 7:20 pm

rear motion-pro rim lock size?

Post by RM » Mon Feb 27, 2006 4:43 pm

On Mon, 27 Feb 2006 22:30:43 +0000, a14@... said:
> The rear KLR rim is 2.50"X17". You mean 2.50 not 3.50 right? Anyway I > sort of noticed the fitment you described. If you realize the 1.60 is > narrower than the 2.50 and therefore the 2.50 needs to be longer because > it is wider then notice you are fiting a longer "saddle" on a rim which > has a smaller diameter where the drop off is sharper that may explain > what you are noticing.
I think I did mean 2.50". I'll have to go back and look at the parts to be sure. I know what you mean about the sharp drop-off, but this lock stands way the hell off the rim. I should yank it apart tonight and study it. The next size down is 2.15". Quite a difference... RM

thomasroznovsky
Posts: 8
Joined: Mon Feb 27, 2006 5:44 pm

wtb: ca-model gas tank (green/silver color)

Post by thomasroznovsky » Mon Feb 27, 2006 5:44 pm

Subject says it all, mine has a nasty dent in it. Anyone switching to the plastic IMS tank, etc. want to help me out? sd_thom99@yahoo.com Thomas

Post Reply

Who is online

Users browsing this forum: No registered users and 31 guests