oil leak from water pump

DSN_KLR650
Post Reply
Brian Smith
Posts: 9
Joined: Sat Aug 26, 2006 10:56 pm

klr truck ramp?

Post by Brian Smith » Sun Sep 04, 2005 4:10 pm

Do any of you guys know where I can get a nice ramp that I can use to put my KLR in the back of my truck? I'd like a ramp that is at least 2 feet wide so I can easily walk the bike up it. I live by myself, so I would not have anybody to help me most of the time, and I don't want to mess with a narrow portable ramp that I will end up dropping the bike off of. I found a couple on the Harbor Freight website that look like they will do the job: http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90555 http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=94057 However, when I went to the local retail store I was not able to find either of these. The people working there were not very helpful either. They were all a bunch of ignorant high school kids with bad attitudes. I suppose I could just order one off the website, but I would like to be able to see one in person before I buy it.
Top
John Mellquist
Posts: 31
Joined: Tue Aug 16, 2005 4:56 pm

klr truck ramp?

Post by John Mellquist » Sun Sep 04, 2005 5:31 pm

Check JC Whitney online. You will find ramps and the parts to make your own there (except the lumber, of course). I made mine for about $50. John Napa, CA --- In DSN_KLR650@yahoogroups.com, "Brian Smith" wrote:
> Do any of you guys know where I can get a nice ramp that I can use
to
> put my KLR in the back of my truck? I'd like a ramp that is at
least
> 2 feet wide so I can easily walk the bike up it. I live by
myself,
> so I would not have anybody to help me most of the time, and I
don't
> want to mess with a narrow portable ramp that I will end up
dropping
> the bike off of. > > I found a couple on the Harbor Freight website that look like they > will do the job: > http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?
itemnumber=90555
itemnumber=94057
> > However, when I went to the local retail store I was not able to
find
> either of these. The people working there were not very helpful > either. They were all a bunch of ignorant high school kids with
bad
> attitudes. I suppose I could just order one off the website, but I > would like to be able to see one in person before I buy it.
Top
John Mellquist
Posts: 31
Joined: Tue Aug 16, 2005 4:56 pm

klr truck ramp?

Post by John Mellquist » Sun Sep 04, 2005 5:33 pm

Oh yeah, there was some discussion about this a few days ago and some good ideas there, too. You might want to look back in the list of messages. John Napa, CA --- In DSN_KLR650@yahoogroups.com, "Brian Smith" wrote:
> Do any of you guys know where I can get a nice ramp that I can use
to
> put my KLR in the back of my truck? I'd like a ramp that is at
least
> 2 feet wide so I can easily walk the bike up it. I live by
myself,
> so I would not have anybody to help me most of the time, and I
don't
> want to mess with a narrow portable ramp that I will end up
dropping
> the bike off of. > > I found a couple on the Harbor Freight website that look like they > will do the job: > http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?
itemnumber=90555
itemnumber=94057
> > However, when I went to the local retail store I was not able to
find
> either of these. The people working there were not very helpful > either. They were all a bunch of ignorant high school kids with
bad
> attitudes. I suppose I could just order one off the website, but I > would like to be able to see one in person before I buy it.
Top
GMac999
Posts: 152
Joined: Sun Jul 11, 2004 10:21 pm

klr truck ramp?

Post by GMac999 » Sun Sep 04, 2005 6:21 pm

Brian, Check out this ramp from Harbor Freight: http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90018 I've been using it for quite a while now with 2, 3, and 4 wheelers. I've rode, walked beside and pushed all three on at different times. Greg -----Original Message----- From: DSN_KLR650@yahoogroups.com [mailto:DSN_KLR650@yahoogroups.com] On Behalf Of Brian Smith Sent: Sunday, September 04, 2005 4:11 PM To: DSN_KLR650@yahoogroups.com Subject: [DSN_KLR650] KLR Truck Ramp? Do any of you guys know where I can get a nice ramp that I can use to put my KLR in the back of my truck? I'd like a ramp that is at least 2 feet wide so I can easily walk the bike up it. I live by myself, so I would not have anybody to help me most of the time, and I don't want to mess with a narrow portable ramp that I will end up dropping the bike off of. I found a couple on the Harbor Freight website that look like they will do the job: http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90555 http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=94057 However, when I went to the local retail store I was not able to find either of these. The people working there were not very helpful either. They were all a bunch of ignorant high school kids with bad attitudes. I suppose I could just order one off the website, but I would like to be able to see one in person before I buy it. Archive Quicksearch at: http://www.angelfire.com/ut/moab/klr650_data_search.html List sponsored by Dual Sport News at: www.dualsportnews.com List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html Yahoo! Groups Links __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Top
Brian Smith
Posts: 9
Joined: Sat Aug 26, 2006 10:56 pm

klr truck ramp?

Post by Brian Smith » Sun Sep 04, 2005 6:53 pm

Do the large gaps in it cause any problems? I looked at a similar one at a local farm supply store, but I think I'd like something more solid like the other 2 ramps I saw on the Harbor Freight site. Also, any good recommendations for tie downs? The ones I saw today all seemed a little flimsy.
--- In DSN_KLR650@yahoogroups.com, GMac999 wrote: > Brian, > > Check out this ramp from Harbor Freight: > http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90018 > > I've been using it for quite a while now with 2, 3, and 4 wheelers. > I've > rode, walked beside and pushed all three on at different times. > > Greg >
Top
saverinm
Posts: 16
Joined: Mon Jan 03, 2005 10:33 pm

klr truck ramp?

Post by saverinm » Sun Sep 04, 2005 7:34 pm

Brian, The large gaps don't cause any problems.... I start my bike and "clutch it" up the ramp.... I always make sure another person is "healing" the ramp or has the safety cable that came with the ramp attached between the ramp and my trucks hitch... I can't remember the make of my ramp, but it folds out in two halves and is spec'ed at 1500lbs.... Got it off my Kaw dealer for $180.00... As far as tie downs, go to Advanced Auto Parts... Again, I can't remember the make, but they are blue in color, cost $16.95/pair and are 1300lb test.... Mike.... --- In DSN_KLR650@yahoogroups.com, "Brian Smith" wrote:
> Do the large gaps in it cause any problems? I looked at a similar
one
> at a local farm supply store, but I think I'd like something more > solid like the other 2 ramps I saw on the Harbor Freight site. > > Also, any good recommendations for tie downs? The ones I saw today > all seemed a little flimsy. > > > --- In DSN_KLR650@yahoogroups.com, GMac999 wrote: > > Brian, > > > > Check out this ramp from Harbor Freight: > > http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?
itemnumber=90018
> > > > I've been using it for quite a while now with 2, 3, and 4
wheelers.
> > I've > > rode, walked beside and pushed all three on at different times. > > > > Greg > >
Top
GMac999
Posts: 152
Joined: Sun Jul 11, 2004 10:21 pm

oil leak from water pump

Post by GMac999 » Sun Sep 04, 2005 11:45 pm

Carl, While you're changing the impeller seals, you should go ahead and clean the oil screen too. Greg -----Original Message----- From: DSN_KLR650@yahoogroups.com [mailto:DSN_KLR650@yahoogroups.com] On Behalf Of Jeff Saline Sent: Sunday, September 04, 2005 10:21 PM To: clguy@...; DSN_klr650@yahoogroups.com Subject: [DSN_KLR650] oil leak from water pump Carl, I'm guessing your oil seal is shot. You can fix it from the right side. No need to split the cases. Make sure you get all the seals and the o-ring. My dealer had to order them for me and it took about 10 days. I bet Fred at www.arrowheadmotorsports.com has them on hand and you could have them by the end of the week. I just got mine to have available when mine or a friend's go bad. Make sure you use silicate free coolant. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650, 79 R100RT Archive Quicksearch at: http://www.angelfire.com/ut/moab/klr650_data_search.html List sponsored by Dual Sport News at: www.dualsportnews.com List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html Yahoo! Groups Links ______________________________________________________ Click here to donate to the Hurricane Katrina relief effort. http://store.yahoo.com/redcross-donate3/
Top
Arden Kysely
Posts: 1578
Joined: Thu Aug 16, 2001 8:18 am

klr truck ramp?

Post by Arden Kysely » Mon Sep 05, 2005 10:01 am

I just saw some reasonably priced wide ramps in the Northern Supply catalog. __Arden --- In DSN_KLR650@yahoogroups.com, "Brian Smith" wrote:
> Do any of you guys know where I can get a nice ramp that I can use
to
> put my KLR in the back of my truck? I'd like a ramp that is at
least
> 2 feet wide so I can easily walk the bike up it. I live by
myself,
> so I would not have anybody to help me most of the time, and I
don't
> want to mess with a narrow portable ramp that I will end up
dropping
> the bike off of. > > I found a couple on the Harbor Freight website that look like they > will do the job: > http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?
itemnumber=90555
itemnumber=94057
> > However, when I went to the local retail store I was not able to
find
> either of these. The people working there were not very helpful > either. They were all a bunch of ignorant high school kids with
bad
> attitudes. I suppose I could just order one off the website, but I > would like to be able to see one in person before I buy it.
Top
Post Reply

Return to “DSN_KLR650”

Who is online

Users browsing this forum: No registered users and 16 guests