new dsn web site numerical ip

DSN_KLR650
Post Reply
krutek@cnx.net
Posts: 3
Joined: Sat Mar 17, 2001 10:51 am

eldon carl's valve adj. 2000?

Post by krutek@cnx.net » Sat Apr 21, 2001 11:30 pm

My question it this. Does The Great One's instructions for valve adjustment apply to the 2000 model, and do I need the manual? I own a 2000 KLR650 C6 and am finding it somewhat difficult at times to determine what is relavent and what isn't. My bike has 800kms on it and I simply will not pay the $200 for the dealer to inspect. Also do the gaskets and seals need to be replaced every inspection? Oh, yeah Eldon mentions "DO NOT remove spark plug" because of automatic compression release , but then at the end of his artical reminds to install a new plug. There is NO doubt in my mind Eldon is an authority on these bikes, and I'm sure glad there are people like him to help people like me. Thanks KLR Listers Dave C6

monahanwb@yahoo.com
Posts: 912
Joined: Thu Jun 01, 2000 11:31 am

eldon carl's valve adj. 2000?

Post by monahanwb@yahoo.com » Sat Apr 21, 2001 11:38 pm

--- In DSN_klr650@y..., krutek@c... wrote:
> My question it this. Does The Great One's instructions for valve > adjustment apply to the 2000 model, and do I need the manual? >
Eldon mentions "DO NOT remove spark plug" because of automatic
> compression release , but then at the end of his artical reminds to > install a new plug.
NO, you don't need the manual (contrary to what everyone will tell you, but it can't hurt to have one just in case). Eldon's instructions are pretty adequate on their own. Yes, you need to remove the spark plug. Blow all the loose dirt out of the hole prior to removal, I use a piece of wire to loosen it up, and blow it out with a straw.

Ric Merry
Posts: 70
Joined: Sun Aug 20, 2000 2:49 pm

new dsn web site numerical ip

Post by Ric Merry » Sun Apr 22, 2001 5:35 pm

As the new Dual Sport News site is S l o w l y populating through every ones name servers here's the numerical IP address; http://216.219.176.147 Sorry for any problems this may have created. ~Ric

Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests