Special Tuning Booklet
-
- Posts: 1
- Joined: Thu Apr 11, 2002 8:58 pm
Special Tuning Booklet
T-Typers:
I have started uploading to the files section of the MG-TABC web site
images of the MG Midget TC special tuning booklet. This is for the
XPAG engine. It is found at:
http://groups.yahoo.com/group/mg-tabc/f ... l%20Tuning%
20Booklet/
If you don't think it is of interest, let me know know and I will
remove it.
Blake
-
- Posts: 30
- Joined: Mon Nov 27, 2000 3:08 am
Re: Special Tuning Booklet
RE: [mg-tabc] Special Tuning Booklet
Blake,
just for info:
http://groups.yahoo.com/..... is NOT the MG-TABC web site. These are two totally independent web sites on two independent web-servers.
Walter,
could you please copy all files from
http://groups.yahoo.com/group/mg-tabc/files/
to http://www.mg-tabc.org/files/?
We should have ONE location for everything. Now we have to look on both locations to assemble all available knowledge.
Thanks
Peter Forstner - TC6325
peter@mg-tc.de
-----Original Message-----
From: exlna [yd3@nvc.net]
Sent: Friday, 12 April, 2002 06:59
To: mg-tabc@yahoogroups.com
Subject: [mg-tabc] Special Tuning Booklet
T-Typers:
I have started uploading to the files section of the MG-TABC web site
images of the MG Midget TC special tuning booklet. This is for the
XPAG engine. It is found at:
http://groups.yahoo.com/group/mg-tabc/files/Midget%20Special%20Tuning%
20Booklet/
If you don't think it is of interest, let me know know and I will
remove it.
Blake
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
-
- Posts: 8
- Joined: Tue May 23, 2000 6:50 am
Re: Special Tuning Booklet
Help,
I'm putting toghether back my TC and currently working
on assembling the engine. The repair manual I have is
an original one and is not to clear as to the correct
torque the head studs go. Can any body assist me in
pounds or kilograms ? Thanks
Orlando
--- "Forstner, Peter" peter@mg-tc.de> wrote:
http://groups.yahoo.com/group/mg-tabc/f ... l%20Tuning%> Blake, > just for info: > http://groups.yahoo.com/..... is NOT the MG-TABC web > site. These are two > totally independent web sites on two independent > web-servers. > > Walter, > could you please copy all files from > http://groups.yahoo.com/group/mg-tabc/files/ > to http://www.mg-tabc.org/files/? > > We should have ONE location for everything. Now we > have to look on both > locations to assemble all available knowledge. > > Thanks > Peter Forstner - TC6325 > > mailto:peter@mg-tc.de > > -----Original Message----- > From: exlna [mailto:yd3@nvc.net] > Sent: Friday, 12 April, 2002 06:59 > To: mg-tabc@yahoogroups.com > Subject: [mg-tabc] Special Tuning Booklet > > > T-Typers: > > I have started uploading to the files section of the > MG-TABC web site > images of the MG Midget TC special tuning booklet. > This is for the > XPAG engine. It is found at: > >
__________________________________________________ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/>> 20Booklet/ > > If you don't think it is of interest, let me know > know and I will > remove it. > > Blake > > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > >
-
- Posts: 153
- Joined: Thu Dec 30, 1999 2:57 am
Re: Special Tuning Booklet
Orlando:
If you torque to 42 Ft. Lbs. you will be just right.
Skip Kelsey...........................................
At 07:53 AM 4/12/02 -0700, Orlando llenza wrote:
>Help, > >I'm putting toghether back my TC and currently working >on assembling the engine. The repair manual I have is >an original one and is not to clear as to the correct >torque the head studs go. Can any body assist me in >pounds or kilograms ? Thanks > >Orlando
-
- Posts: 10
- Joined: Thu Nov 16, 2000 3:26 pm
Re: Special Tuning Booklet
RE: [mg-tabc] Special Tuning Booklet Peter and other TABC'ers: I totally and emphatically agree! We should have one location, if it can be accomplished without excessive demands on Walter. I will confess to being digitally challenged, but Yahoo is impossible. I have had three passwords in the last week, and have not yet been able to access the stuff I am looking for. Larry . Walter,
could you please copy all files from
http://groups.yahoo.com/group/mg-tabc/files/
to http://www.mg-tabc.org/files/? We should have ONE location for everything. Now we have to look on both locations to assemble all available knowledge. Thanks
Peter Forstner - TC6325 peter@mg-tc.de -----Original Message
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
-
- Posts: 8
- Joined: Tue May 23, 2000 6:50 am
Re: Special Tuning Booklet
Thanks for the info.
Orlando
--- Skip Kelsey kelsey@shadetreemotors.com> wrote:
__________________________________________________ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/> Orlando: > > If you torque to 42 Ft. Lbs. you will be just right. > > Skip > Kelsey........................................... > > > At 07:53 AM 4/12/02 -0700, Orlando llenza wrote: > >Help, > > > >I'm putting toghether back my TC and currently > working > >on assembling the engine. The repair manual I have > is > >an original one and is not to clear as to the > correct > >torque the head studs go. Can any body assist me in > >pounds or kilograms ? Thanks > > > >Orlando > > > > > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > >
-
- Posts: 36
- Joined: Tue Apr 09, 2002 1:45 pm
Re: Special Tuning Booklet
All:
If all material for the MG-TABC group must pass through one individual,
it is not a group site. It is a private site in which the owner has
agreed, at his/her discretion, to post information which may be of use
to others. The Yahoo site is a group site because members may leave
files for others to look at. Consequently I have REMOVED all the
material I posted at Yahoo.
Auf Viedersehen und lebewohl
Blake J. Urban
Moderator, MGA twin cam BBS at Yahoo.
http://groups.yahoo.com/messages/mgatwincam
-
- Posts: 52
- Joined: Tue Oct 23, 2001 12:52 pm
Re: Special Tuning Booklet
"Consequently I have REMOVED all the material I posted at Yahoo."
Am not sure I understand this thread. Is the information to be made
available, and if so, where? If not, why not?
Joe Gates
'49 TC 8675
'80 MGB
Who is online
Users browsing this forum: No registered users and 35 guests