MGTA

Post Reply
Larry Broadstone
Posts: 1
Joined: Tue Sep 04, 2001 2:37 pm

MGTA

Post by Larry Broadstone » Tue Sep 04, 2001 3:37 pm

MGTA I know this must be "old-hat", but being a newly acquired 1936 MGTA guy and living on an island, I could use some expert advise. The problem is that I need leaded gas and all I can find is a "synthetic" additive. Will this mess up my valves? What is everyone else doing? Thanks for any help.... Aloha
Top
Frank O_ The Mountain
Posts: 233
Joined: Thu Dec 25, 2008 3:02 pm

Re: MGTA

Post by Frank O_ The Mountain » Tue Sep 04, 2001 5:38 pm

In a message dated 9/4/01 3:38:41 PM Pacific Daylight Time, Larry@minitstop.com writes: >>
Use regular gas Larry and don't worry about it....you are not going to put enough stress on that engine to harm the valve seats....unless it needs a valve job anyway. When it does, have hardened seats put in and end of story. Additives are a waste of money. Terry in Oakland Regards to Willie
Top