--- On Sun, 10/14/12, Jud wrote: From: Jud Subject: [DSN_KLR650] Re: I have BALLS........????? To: mailto:DSN_KLR650%40yahoogroups.com Date: Sunday, October 14, 2012, 5:09 PM How did you discover the balls inside the tube? Were you able to get them out through the valve stem, or did you have to cut the tube open? --- In mailto:DSN_KLR650%40yahoogroups.com, mark ward wrote: > > I was ballancing the new tire and heard a noise. > > It turn out, there are 4 little (rubber?) balls inside the inner-tube. (Metzler HD) > > It Drove me nuts (oop's already there) I thougt the new tire was rubbing or maybe worse a bearing going bad. > > I spent 1/2hr + testing everything else, before pulling it all apart and checking the tube. > > Just an FYI for future use. > > [Non-text portions of this message have been removed] > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
i have balls........?????
-
- Posts: 2434
- Joined: Thu Apr 06, 2000 10:08 am
i have balls........?????
You sure this was a Metzeler and not a Bridgestone UHD tube? Just about every Bridgestone UHD tube I have dealt with will have these rubber BBs inside. They don t seem to bother anything and you can t hear them once underway.
Fred
http://www.arrowheadmotorsports.com
From: mark ward
Sent: Sunday, October 14, 2012 2:24 PM
To: DSN_KLR650@yahoogroups.com ; Jud
Subject: Re: [DSN_KLR650] Re: I have BALLS........?????
after getting the garrage very quite, I hear the rolling.
When I pulled the tube and held it up, I could feel them in the bottom.
To BIG to have gotten in or out threw the stem. (1/8-3/16? inch)
Who is online
Users browsing this forum: No registered users and 17 guests