fs: 2006 klr excellent condition

[Guy Young]

Working on a customer's bike. Waited too long to adjust the valves and one exhaust clearance go too tight, which resulted in a burned exhaust valve. Destroyed the valve and the valve's seat area of the head. Whatchagot?? Either PM, or email me at: gbyoung2 at versizon dot net PS: This is the same bike I asked a question about earlier. Finally got off my duff and did a leak down test. This showed the exhaust valve(s) were leaking. Pulled the head and found the problem. Last pages at: http://gbyoung2.smugmug.com/Motorcycles/Busansky-KLR-1/22968668_MM3dJm

[Warren Brandt]

Nice pictures. How many miles on the engine?

--- In DSN_KLR650@yahoogroups.com, "Guy Young" wrote: > > Working on a customer's bike. Waited too long to adjust the valves and one exhaust clearance go too tight, which resulted in a burned exhaust valve. Destroyed the valve and the valve's seat area of the head. > > Whatchagot?? > > Either PM, or email me at: gbyoung2 at versizon dot net > > PS: This is the same bike I asked a question about earlier. Finally got off my duff and did a leak down test. This showed the exhaust valve(s) were leaking. Pulled the head and found the problem. > > Last pages at: > > http://gbyoung2.smugmug.com/Motorcycles/Busansky-KLR-1/22968668_MM3dJm >

[larslemberg]

I've decided to sell my 2006 KLR, Northern Virginia Washington DC area. http://washingtondc.craigslist.org/nva/mcy/3136443490.html