klr brakes pre08

DSN_KLR650
Post Reply
Jeff Khoury
Posts: 684
Joined: Tue Mar 31, 2009 11:08 am

klr brakes pre08

Post by Jeff Khoury » Fri Apr 13, 2012 10:27 am

In my experience the right (or wrong) pads can make all the difference in the world. I was in a pinch one time and installed some EBC organic pads on my '09. (It's all they had in stock at the local stealer). They were *%&^ing dangerous. Now I use only HH-rated sintered pads. I don't give a crap how hard they are on my rotors, I wanna STOP when I grab that lever. -Jeff Khoury
----- Original Message ----- From: "Jeffrey" To: "DSN KLR650" DSN_KLR650@yahoogroups.com> Sent: Friday, April 13, 2012 8:15:08 AM Subject: [DSN_KLR650] KLR Brakes Pre08 If you ride on the street much, you need the Oversized front brake kit. The rear brake is fine. You have plenty of leverage with your foot to lock it. I have the front oversized EBC contour rotor and the Galfer rear wave rotor. I only got the rear wave rotor because I scored a slightly used one on EBAY cheaply. My stock rotor was well worn but still worked. Changing out to another bike's braking system is a hassle and not necessary. J#3

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests