turn/brake light conversion kit

[David Nichols]

Wow, where did you get that? Is that a CAD model? [Non-text portions of this message have been removed]

[Darren Clark]

David, Here is a CT cross section of the KLR head. You can see where the drain hole leads straight into the spark plug hole. http://www.flickr.com/photos/84373829@N00/6107730840/in/photostream Darren Clark

On 09.02.2011 4:15 PM, David Nichols wrote: > I thought I read that there is a drain hole just below the coolant hose on the right side of the engine that allows water to drain out of the spark plug area. See photo linked below for what I'm talking about. If that's what this is, how do you unplug it? I tried to blow compressed air into this and it's definetly plugged. > > http://www.flickr.com/photos/9992563@N08/6106655143/ > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > List Sponsors - Dual Sport News: http://www.dualsportnews.com > Arrowhead Motorsports: http://www.arrowheadmotorsports.com > List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html > Member Map: http://groups.yahoo.com/group/DSN_KLR650/app/peoplemap/view/map > Group Apps: http://groups.yahoo.com/group/DSN_KLR650/grouplets/subscriptionsYahoo! Groups Links > > > > [Non-text portions of this message have been removed]

[klrdon@comcast.net]

Genius! -----Original Message----- From: eddie Sent: Friday, September 02, 2011 1:59 PM To: KLR650 list Subject: [DSN_KLR650] Turn/Brake Light conversion kit Feel like tinkering? I made my own "kit" using red LED lights found at the local auto parts store. Run the LED (+) wires back through the signal stalks and connect into the tag light wire. This is the nifty part: Connect the LED (-) wire to the turn signal's (+) wire. Yes, ground the LED to the positive wire. Here's what happens: signal off? The LED is illuminated by the hot wire from the tag and grounded through the turn signal. The signal bulb remains off. Signal on? The LED loses it's ground every time the signal blinks and the signal works normally. I put two LEDs per signal assembly for about $10 total. The LEDs I got had the step-down resistors wired inline right near the LEDs themselves. All I had to do was shorten the wire leads as needed while keeping the resistors intact. eddie

> [Original Message] > From: david.r.nichols@... > To: DSN_KLR650@yahoogroups.com> > Date: 9/2/2011 9:29:41 AM > Subject: [DSN_KLR650] Twisted Throttle's Turn Signal to

Running/Turn/Brake Light conversion kit

> > I searched and didn't find this discussed before. Has anyone bought this?

Looks interesting; it converts your rear turn signals to running lights (amber) and additional brake lights (red) using LED's that install into your existing turn signal housings.

>

------------------------------------ List Sponsors - Dual Sport News: http://www.dualsportnews.com Arrowhead Motorsports: http://www.arrowheadmotorsports.com List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html Member Map: http://groups.yahoo.com/group/DSN_KLR650/app/peoplemap/view/map Group Apps: http://groups.yahoo.com/group/DSN_KLR650/grouplets/subscriptionsYahoo! Groups Links ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1392 / Virus Database: 1520/3873 - Release Date: 09/02/11

[Darren Clark]

Yes and no, it's a CT scan of a KLR650 head. The data from the CT scan can be turned into a CAD model, but right now it's just voxel (a pixel is a point in 2D space, a voxel is a volume in 3D space) data set, and it's about 1.5GB in size. I did this a few years ago to see what can be done with the stock head to improve performance, and if there was enough meat in some areas to do any porting.

On 09.02.2011 8:18 PM, David Nichols wrote: > > Wow, where did you get that? Is that a CAD model? > > > *From: * Darren Clark ; > *To: * David Nichols ; > *Cc: * DSN_KLR650@yahoogroups.com DSN_KLR650@yahoogroups.com>; > *Subject: * Re: [DSN_KLR650] Drain hole for sparkplug? CT Scan view > *Sent: * Sat, Sep 3, 2011 12:15:34 AM > > David, > Here is a CT cross section of the KLR head. You can see where the > drain hole leads straight into the spark plug hole. > > http://www.flickr.com/photos/84373829@N00/6107730840/in/photostream > > Darren Clark > > > > On 09.02.2011 4:15 PM, David Nichols wrote: > > I thought I read that there is a drain hole just below the coolant > hose on the right side of the engine that allows water to drain out of > the spark plug area. See photo linked below for what I'm talking > about. If that's what this is, how do you unplug it? I tried to blow > compressed air into this and it's definetly plugged. > > > > http://www.flickr.com/photos/9992563@N08/6106655143/ > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > List Sponsors - Dual Sport News: http://www.dualsportnews.com > > Arrowhead Motorsports: http://www.arrowheadmotorsports.com > > List FAQ courtesy of Chris Krok: http://www.bigcee.com/klr650faq.html > > Member Map: > http://groups.yahoo.com/group/DSN_KLR650/app/peoplemap/view/map > > Group Apps: > http://groups.yahoo.com/group/DSN_KLR650/grouplets/subscriptionsYahoo! > Groups Links > > > > > > > > > [Non-text portions of this message have been removed]