cmc?
-
- Posts: 108
- Joined: Wed May 03, 2006 4:52 am
fork bearings
Mine is NOT one of the KLRs on this continent with this piece of exotica, after running a test and deciding that it wasn't really worth it: http://bigcee.com/springtwist/ I had posted this during the big debate, but later took it down when I redid my website. If you really need(le) the bearings, you can get them from McMaster Carr. C -- J. Christopher Krok, Ph.D. Big Cee Studios> 1b. Re: Front fork springs > Posted by: "Jud" judjonzz@... judjonzz > Date: Sat May 22, 2010 5:34 am ((PDT)) > > I went with an off-the-shelf coupler a bit shorter than 2", and made up > the deficit by adding a pair of Don Rolando's super trick fork spring > bearings, after first checking with dirt-bike guru Rick Sieman to be sure > they weren't snake oil. He assured me they were not, but I'll bet there > are not three KLRs on the North American continent that sport this > exclusive bit of exotica.
Who is online
Users browsing this forum: No registered users and 14 guests