Where are 08'-09' owners mounting the Stebel compact nautilus horn?
eddie
09' KLR650
[Non-text portions of this message have been removed]
overflow
-
- Posts: 203
- Joined: Tue Jun 02, 2009 12:07 am
horn question
Directly behind the res. bottle on my 09' are the regulator rectifier and some smog-related stuff.
eddie
----- Original Message ----- From: tomatocity To: transalp1@... Sent: 7/6/2009 2:48:51 PM Subject: Re: [DSN_KLR650] Horn question Usually behind the radiator reservoir. A forum member is making the bracket and a wiring harness for the Stebel install. On Mon, Jul 6, 2009 at 11:33 AM, transalp 1 wrote: Where are 08'-09' owners mounting the Stebel compact nautilus horn? eddie 09' KLR650 [Non-text portions of this message have been removed] . [Non-text portions of this message have been removed]
-
- Posts: 467
- Joined: Fri Oct 25, 2002 10:45 am
horn question
I'd like to hear about the bracket/wiring harness if the person decides
to sell them.
DC
transalp 1 wrote:
> > > Directly behind the res. bottle on my 09' are the regulator rectifier > and some smog-related stuff. > > eddie > > ----- Original Message ----- > From: tomatocity > To: transalp1@... > Sent: 7/6/2009 2:48:51 PM > Subject: Re: [DSN_KLR650] Horn question > > Usually behind the radiator reservoir. > > A forum member is making the bracket and a wiring harness for the > Stebel install. > > On Mon, Jul 6, 2009 at 11:33 AM, transalp 1 > wrote: > > Where are 08'-09' owners mounting the Stebel compact nautilus horn? > eddie > 09' KLR650 > > [Non-text portions of this message have been removed] > > . > > [Non-text portions of this message have been removed] > >
-
- Posts: 222
- Joined: Wed May 23, 2007 7:47 pm
overflow
Benji,
It sounds to me like the float valve is not sealing.
If by "overflow screw" you mean the float bowl drain screw, if fuel doesn't drip from its opening (put a length of clear tubing on the drain port to check this), there is no problem there. And a faulty drain screw would not cause fuel to leak from any other point on the carb. (I take it to mean fuel is leaking from more than one place on the carb when you said, "Overflowing everywhere".
On the other hand, if you mean that fuel is leaking only out of the drain port, then it sounds as if the drain screw is not seating properly. IIRC, its tip is not a sharp point.
HTH,
Mike Martin,
Louisville, KY
________________________________
From: benji_sounds
To: DSN_KLR650@yahoogroups.com
Sent: Saturday, July 4, 2009 3:08:41 PM
Subject: [DSN_KLR650] Overflow
Overflowing everywhere whilst idling at the lights, parked up, whilst riding its been doing it a while now. i reset my float height to 17.5mm as stated in the book and thought i had solved it.. darn thing.
Ive just taken my overflow screw out and found its quite pitted and chewed up and not very pointy on the end.. Is this my problem.
[Non-text portions of this message have been removed]
Who is online
Users browsing this forum: No registered users and 19 guests