[parts list]

[fasteddiecopeman]

Regarding Fram filters: on the Suzuki Bandit site it's been stated that Fram filters 'mush' up and have caused engine failures. FYI. Ed

--- In DSN_KLR650@yahoogroups.com, Jeff Saline wrote: > > On Mon, 28 Jul 2008 13:15:55 -0400 LDHunter writes: > > SNIP > > SNIP > > SNIP > > > I buy Fram oil filters from Discount Auto Parts here. They have a > > small > > motorcycle section and have filters for all three of my bikes in > > stock. > > SNIP > > > > $bob$ > <><><><><><><><><> > <><><><><><><><><> > > $bob$, > > Just a point I recently learned about the Fram filters for the KLR. Some > of the newer ones are about 2.5mm longer than other filters. I had one I > bought last spring to check the o-ring. Recently I heard on KLR650.net > that the new Frams are longer than the older ones. I measured the one I > bought and it was longer. When Steve and Chris were out here last month > when returning from Alaska we tried to install it in each bike. One is > an 06 and the other is an 07. It was too long and the cover wouldn't > seat. > > So although I think Fram filters are as good as the next filter for most > applications... I think they are risky business with the KLR650. > > Just a data point. > > Best, > > Jeff Saline > ABC # 4412 South Dakota Airmarshal > Airheads Beemer Club www.airheads.org > The Beautiful Black Hills of South Dakota > 75 R90/6, 03 KLR650, 79 R100RT > ____________________________________________________________ > Shop now for huge discounts on quality surveillance cameras. Click here! > http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3mYPu6zct3PeWN8oWzm7xfBq16J41 5DOGuPXoSFGerLRjt6M/ >

[Arden Kysely]

Are the Bandit filters cartridges or canisters? With a cartridge filter like the KLR uses, at least you can get some idea of quality before sticking it in the bike. The canisters are all mystery shrouded in steel. I cut open a bunch of different filters of the same application several years back and found huge variations in quality. The Frams were by far the worst, with paper end caps and poor gluing of the filter element. I can see why they might turn to mush. Hopefully they've improved on that, but I'll go out of my way not to buy Fram. __Arden --- In DSN_KLR650@yahoogroups.com, "fasteddiecopeman" wrote:

> > Regarding Fram filters: on the Suzuki Bandit site it's been stated

that Fram filters 'mush'

> up and have caused engine failures. FYI. > Ed > --- In DSN_KLR650@yahoogroups.com, Jeff Saline wrote: > > > > On Mon, 28 Jul 2008 13:15:55 -0400 LDHunter writes: > > > > SNIP > > > > SNIP > > > > SNIP > > > > > I buy Fram oil filters from Discount Auto Parts here. They have

a

> > > small > > > motorcycle section and have filters for all three of my bikes

in

> > > stock. > > > > SNIP > > > > > > $bob$ > > <><><><><><><><><> > > <><><><><><><><><> > > > > $bob$, > > > > Just a point I recently learned about the Fram filters for the

KLR. Some

> > of the newer ones are about 2.5mm longer than other filters. I

had one I

> > bought last spring to check the o-ring. Recently I heard on

KLR650.net

> > that the new Frams are longer than the older ones. I measured

the one I

> > bought and it was longer. When Steve and Chris were out here

last month

> > when returning from Alaska we tried to install it in each bike.

One is

> > an 06 and the other is an 07. It was too long and the cover

wouldn't

> > seat. > > > > So although I think Fram filters are as good as the next filter

for most

> > applications... I think they are risky business with the KLR650. > > > > Just a data point. > > > > Best, > > > > Jeff Saline > > ABC # 4412 South Dakota Airmarshal > > Airheads Beemer Club www.airheads.org > > The Beautiful Black Hills of South Dakota > > 75 R90/6, 03 KLR650, 79 R100RT > > ____________________________________________________________ > > Shop now for huge discounts on quality surveillance cameras.

Click here!

> > >

http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3mYPu6zct3PeWN8oWzm7 xfBq16J41

> 5DOGuPXoSFGerLRjt6M/ > > >

[Eric Foster]

Anyone got an idea as to the prob with this bike? E Holy crap! You have to replace a brand new tire? Man that sucks! Did it go flat quickly when you were riding it or was it a slow leak? At least you got my hunk of junk out of the way so you have all the space you'll need! Yup, the ole girl is back to normal! Running like a top! Except for every afternoon when she dies on the side road. She was doing it for about 2 weeks prior to my valves being bent. Feels like it's running out of gas. Funny thing is it only does it in the afternoon when it's hot out. I made it to work this and every morning absolutely no problem at all. After sitting in the sun all day and then trying to ride home in 80 degree heat she calves, I wait a few minutes can start her back up and she will most of the time run fine the rest of the way home. I don't think its junk in the carb as it would probably die in the morning to. I think my vacuum line on the petcock is bad and when it gets hot isn't sealing right or has a hole in it. That's the line that I lost the stupid little wire clamp off of. I'm going to stop at Blake's tonight and get a couple of mini hose clamps. Hopefully that will solve the problem if not it's back to the drawing board. All in all she's running great no vibration, quiet, little more power and I'm sure I'm getting better gas mileage. Again thanks so much for all your help! j -----Original Message----- From: Eric Foster [mailto:thehaymaker@...] Sent: Monday, July 28, 2008 11:20 PM To: Woodside, James A Subject: Re: Parts list Any time man, it was fun! I'm taking it all was well? I pooted a tire on my Kawi Sun night and plugged it until a new one arrived. It threw the plug monday AM on the way to work. Tonight I swung by where I left it, replugged, slimed, and rode her home. Just finshed breaking the tire down in hopes I can install the new tues. night......... Someone stop the world, I want to get off. Know any 6' swedish blondes willing to help? E Woodside, James A wrote:

> Just wanted to say thank you again for all your help and expertise! I > couldn't have done it without you! I'll be up soon to get my tool

boxes.

> > > Thanks again > j > > >