city lights ?

[a14@att.net]

It sounds like you have the clutch switch disabled and that is the three wire plug for it. For the city lights you want to look for two bullet connectors near the headlight on the right. The Black/Yellow Stripe one is ground. The other 12v. Be aware though that if you have the aftermarket switch to turn off the headlight if you turn off the tail light the GPS will turn off. Also if you turn off the key the GPS will turn off. If you wire direct to the battery with the proper fuse the GPS will stay on when you stop for a break. It doesn't draw enough to drain the battery unless you leave it on a very long time. Walt

> I was about to hook up my new Zumo and figured the unused city lights > connector would work fine. Before splicing I checked for voltage. > Nothing...not even with the key on. Have I got the right wires? There > are three wires attached to the loose connector: black/yellow, > red/blue, and light blue. I tried each wire with my voltmeter > grounded to the frame, thinking one would be hot and another grounded. > Got any clues for me? > > Thanks, > Dave >