replacing swingarm bearings -advice?
-
- Posts: 1
- Joined: Fri Jul 04, 2003 9:51 am
preparing for the grand adventure!
Cheers KLR650 riders,
My name is Stanley and I am preparing my 1996 KLR650
and my wife's 1996 XT350 for our first Grand
Adventure. What I mean by Grand Adventure is a
dual-sport camping trip some where in the forests of
Washington State. So does anyone know or have any
suggestions on preparing XT350 and KLR650 (which
already has Kawasaki tank, tail, and saddle bags)? I
am not new to motorcycles in the past couple of weeks
I have sold off my collection of about 55 dirt and
street bikes (Bultaco, Hodaka, Husqvarna, Honda,
Kawasaki, Suzuki, and Yamaha), but still have repair
manuals just incase one day....... Just ask if anyone
needs any repair info on cycles from about 1965 thru
1989 because I should have the answer.
Thank you!
Have fun,
Stanley
P.S. Where can I find a bag set for the XT350?
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
-
- Posts: 629
- Joined: Wed Sep 11, 2002 3:39 am
replacing swingarm bearings -advice?
You must be a English Teacher...
what=it=bearing.
put bearing in freezer, pull bearing out of freezer, put bearing
into swingarm.
and or of course the old bearing is assumed to be already removed by
self.
--- In DSN_klr650@yahoogroups.com, "Thomas J Komjathy"
wrote:
pounding.> Pull what out?? > ----- Original Message ----- > From: "klr6501995" > To: DSN_klr650@yahoogroups.com> > Sent: Thursday, July 03, 2003 8:18 PM > Subject: [DSN_klr650] replacing swingarm bearings -advice? > > > > Well; I'll be replacing the left side swingarm bearing. > > > > Any advice on driving the needle bearings in would be appreciated. > > Seems to me that needle bearings are a bit more sensitive to
FAQ> > > > I'm thinking, grease it up and freeze it over night. Pull it out > > right before the moment of placing it into the swingarm. > > > > > > > > > > List sponsored by Dual Sport News at www.dualsportnews.com. List
http://docs.yahoo.com/info/terms/> courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > > Unsubscribe by sending a blank message to: > > DSN_klr650-unsubscribe@yahoogroups.com . > > > > > > > > Your use of Yahoo! Groups is subject to
> > > >
Who is online
Users browsing this forum: No registered users and 19 guests