tools and fasteners

[dbangus_1]

The list is closing due to spam? You must mean the crap that keeps appearing when you try to read a message. The list has changed with most of the old listers gone but its still a good place to share knowledge and experiences. No new members because of spam sounds like a cop out. DAngus a-14 A little spam in ones diet provides some nutrition one may lack in an otherwise well balanced diet. Its the B.S. you should be aware of.

[Devon Jarvis]

Okay, I don't know how that happened, I thought I was replying to Justin directly. I had more than one message window open, and I wrote the groups address into the wrong one. Sorry. Devon Devon Jarvis wrote:

> > When I bypassed my starter switch, I soldered the wires and then > shrink-wrapped them. Crimp slices seem to work OK if you use electrical > grease on the wires and crimp them solidly. > > Devon > A15 > > Justin Carlson wrote: > > > > You were right about the switch. When I respliced the wires that bypassed > > the side stand switch the bike started right up. I've been working so much > > that I haven't had 2 hours on a weekend to sit down and figure out the > > problem. May be next time I'll try to jump the starter with a screw driver > > so I can see those sparks fly. > > > > Regarding Pirsig,

snip