Re: Can Anyone Identify the Episodes?

[Michael Buck]

I have been searching through the Blu-ray set to see if I can find certain "missing" scenes that I remember from the original series but have not seen in either the VHS or DVD sets. I have not found them yet, but perhaps they are there and I am just missing them. If anyone can identify the episodes in which these scenes occurred, that will be of great help.
The first scene that I am looking for is one in which someone (Don, I believe) is working in the crashed Jupiter 2 (near the ceiling, I think), when something happens (Smith?) to cause a high-voltage cable to be sparking around on the floor of the upper deck. I believe that this was a 1st season episode.
The other scene, also from a 1st season episode as I recall, shows someone (Will I think) reading from a Robot Manual. As I recall, the robot was damaged for some reason. The cover of the manual shows a great drawing of the Robot, with its arms extended.
Of course, it has been 50 years, but I'm pretty sure that I actually did see these scenes back then.
Any ideas?
Thanks,
Mike Buck

--
Michael A. Buck(406) 836-9857 Sheridan H. Buck(406) 836-9848 82 Bend View LaneGreat Falls, Montana 59404

[David Reabe]

The scene with the robot manual,was that not when the robot had to be disassembled for the trip back to the Jupiter 2,2nd or 3rd episode of Season 1,when the iced over ocean melted and they had to travel in the rough sea during a storm. Don was almost lost when on the roof of chariot trying to fix the antenna. The next day after returning to the Jupiter 2,Will was reading the manual to put the robot back together.

[ponyboy8844]

I know you can see the Robot manual in the second season episode "Wreck Of The Robot" but Will was putting the Robot back together. Don hands Will the manual when he goes to eat breakfast and you can see the drawing of the Robot on the book cover. 

-------- Original message --------
From: "David Reabe dar19904@yahoo.com [B9Builders]"
Date: 10/04/2015 9:29 PM (GMT-07:00)
To: B9Builders@yahoogroups.com
Subject: [B9Builders] Re: Can Anyone Identify the Episodes?

 
The scene with the robot manual,was that not when the robot had to be disassembled for the trip back to the Jupiter 2,2nd or 3rd episode of Season 1,when the iced over ocean melted and they had to travel in the rough sea during a storm. Don was almost lost when on the roof of chariot trying to fix the antenna. The next day after returning to the Jupiter 2,Will was reading the manual to put the robot back together.

[Bob Darlington]

On Sun, Oct 4, 2015 at 9:11 PM, Michael Buck mikeandsheridanbuck@gmail.com [B9Builders] wrote:

I have been searching through the Blu-ray set to see if I can find certain "missing" scenes that I remember from the original series but have not seen in either the VHS or DVD sets. I have not found them yet, but perhaps they are there and I am just missing them. If anyone can identify the episodes in which these scenes occurred, that will be of great help.
The first scene that I am looking for is one in which someone (Don, I believe) is working in the crashed Jupiter 2 (near the ceiling, I think), when something happens (Smith?) to cause a high-voltage cable to be sparking around on the floor of the upper deck. I believe that this was a 1st season episode.

The cable sparking was from Season 1 Episode 11, Wish Upon a Star:
Major West is nearly killed when Dr. Smith causes an explosion, and a fed-up Professor thinks it best if he leaves. Dejected, Smith heads off, but he is followed by Will who feels sorry for him. Smith and Will then find the wreckage of an alien spaceship and a mysterious machine that creates anything they wish for. Word of the magical machine reaches the Robinsons who want to use the device as well, but their eventual greed forces the Professor to get rid of it. Refusing to destroy it, Smith takes it back to the alien ship, but there he summons a servant to tend to his needs. The machine instead conjures a menacing mummy-like creature who tries to take the machine away.

The other scene, also from a 1st season episode as I recall, shows someone (Will I think) reading from a Robot Manual. As I recall, the robot was damaged for some reason. The cover of the manual shows a great drawing of the Robot, with its arms extended.
Of course, it has been 50 years, but I'm pretty sure that I actually did see these scenes back then.
Any ideas?
Thanks,
Mike Buck

--
Michael A. Buck(406) 836-9857 Sheridan H. Buck(406) 836-9848 82 Bend View LaneGreat Falls, Montana 59404

[robotym3@rocketmail.com]

Your first scene sounds like season 2, TRIP THRU THE ROBOT,  The Second scene also sounds like a season 2 episode 
From: "Michael Buck mikeandsheridanbuck@gmail.com [B9Builders]"
To: B9Builders@yahoogroups.com
Sent: Sunday, October 4, 2015 11:11:17 PM
Subject: [B9Builders] Can Anyone Identify the Episodes?

 

I have been searching through the Blu-ray set to see if I can find certain "missing" scenes that I remember from the original series but have not seen in either the VHS or DVD sets.  I have not found them yet, but perhaps they are there and I am just missing them.  If anyone can identify the episodes in which these scenes occurred, that will be of great help.
The first scene that I am looking for is one in which someone (Don, I believe) is working in the crashed Jupiter 2 (near the ceiling, I think), when something happens (Smith?) to cause a high-voltage cable to be sparking around on the floor of the upper deck.  I believe that this was a 1st season episode.
The other scene, also from a 1st season episode as I recall, shows someone (Will I think) reading from a Robot Manual.  As I recall, the robot was damaged for some reason.  The cover of the manual shows a great drawing of the Robot, with its arms extended.
Of course, it has been 50 years, but I'm pretty sure that I actually did see these scenes back then.
Any ideas?
Thanks,
Mike Buck

--
Michael A. Buck(406) 836-9857 Sheridan H. Buck(406) 836-9848 82 Bend View LaneGreat Falls, Montana  59404

[Sky Rocket Guy]

I want to connect 9 LEDs in parallel.
Each LED is rated at 3 volts and 100mw.
If I use a 3v switching power supply, is it still best to use resistors?
This wizard suggests to use at least 1 ohm resistors.
http://www.ledcalc.net/

Thoughts?
Thank you,Jeff
#ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418 -- #ygrps-yiv-558673657yiv0484045418ygrp-mkp { border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mkp hr { border:1px solid #d8d8d8;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mkp #ygrps-yiv-558673657yiv0484045418hd { color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mkp #ygrps-yiv-558673657yiv0484045418ads { margin-bottom:10px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mkp .ygrps-yiv-558673657yiv0484045418ad { padding:0 0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mkp .ygrps-yiv-558673657yiv0484045418ad p { margin:0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mkp .ygrps-yiv-558673657yiv0484045418ad a { color:#0000ff;text-decoration:none;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-sponsor #ygrps-yiv-558673657yiv0484045418ygrp-lc { font-family:Arial;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-sponsor #ygrps-yiv-558673657yiv0484045418ygrp-lc #ygrps-yiv-558673657yiv0484045418hd { margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-sponsor #ygrps-yiv-558673657yiv0484045418ygrp-lc .ygrps-yiv-558673657yiv0484045418ad { margin-bottom:10px;padding:0 0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418actions { font-family:Verdana;font-size:11px;padding:10px 0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418activity { background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418activity span { font-weight:700;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418activity span:first-child { text-transform:uppercase;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418activity span a { color:#5085b6;text-decoration:none;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418activity span span { color:#ff7900;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418activity span .ygrps-yiv-558673657yiv0484045418underline { text-decoration:underline;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418attach { clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418attach div a { text-decoration:none;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418attach img { border:none;padding-right:5px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418attach label { display:block;margin-bottom:5px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418attach label a { text-decoration:none;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 blockquote { margin:0 0 0 4px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418bold { font-family:Arial;font-size:13px;font-weight:700;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418bold a { text-decoration:none;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 dd.ygrps-yiv-558673657yiv0484045418last p a { font-family:Verdana;font-weight:700;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 dd.ygrps-yiv-558673657yiv0484045418last p span { margin-right:10px;font-family:Verdana;font-weight:700;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 dd.ygrps-yiv-558673657yiv0484045418last p span.ygrps-yiv-558673657yiv0484045418yshortcuts { margin-right:0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418attach-table div div a { text-decoration:none;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418attach-table { width:400px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418file-title a, #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418file-title a:active, #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418file-title a:hover, #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418file-title a:visited { text-decoration:none;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418photo-title a, #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418photo-title a:active, #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418photo-title a:hover, #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div.ygrps-yiv-558673657yiv0484045418photo-title a:visited { text-decoration:none;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 div#ygrps-yiv-558673657yiv0484045418ygrp-mlmsg #ygrps-yiv-558673657yiv0484045418ygrp-msg p a span.ygrps-yiv-558673657yiv0484045418yshortcuts { font-family:Verdana;font-size:10px;font-weight:normal;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418green { color:#628c2a;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418MsoNormal { margin:0 0 0 0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 o { font-size:0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418photos div { float:left;width:72px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418photos div div { border:1px solid #666666;height:62px;overflow:hidden;width:62px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418photos div label { color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418reco-category { font-size:77%;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418reco-desc { font-size:77%;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 .ygrps-yiv-558673657yiv0484045418replbq { margin:4px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-actbar div a:first-child { margin-right:2px;padding-right:5px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mlmsg { font-size:13px;font-family:Arial, helvetica, clean, sans-serif;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mlmsg table { font-size:inherit;font:100%;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mlmsg select, #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 input, #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 textarea { font:99% Arial, Helvetica, clean, sans-serif;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mlmsg pre, #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 code { font:115% monospace;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mlmsg * { line-height:1.22em;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-mlmsg #ygrps-yiv-558673657yiv0484045418logo { padding-bottom:10px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-msg p a { font-family:Verdana;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-msg p#ygrps-yiv-558673657yiv0484045418attach-count span { color:#1E66AE;font-weight:700;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-reco #ygrps-yiv-558673657yiv0484045418reco-head { color:#ff7900;font-weight:700;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-reco { margin-bottom:20px;padding:0px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-sponsor #ygrps-yiv-558673657yiv0484045418ov li a { font-size:130%;text-decoration:none;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-sponsor #ygrps-yiv-558673657yiv0484045418ov li { font-size:77%;list-style-type:square;padding:6px 0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-sponsor #ygrps-yiv-558673657yiv0484045418ov ul { margin:0;padding:0 0 0 8px;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-text { font-family:Georgia;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-text p { margin:0 0 1em 0;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-text tt { font-size:120%;} #ygrps-yiv-558673657 #ygrps-yiv-558673657yiv0484045418 #ygrps-yiv-558673657yiv0484045418ygrp-vital ul li:last-child { border-right:none !important;} #ygrps-yiv-558673657

[Bob Darlington]

You absolutely must use resistors when paralleling LEDs. LEDs are current devices. The more current, the more light produced -to a point. They will not do much in the way of restricting the amount of current through them. That's what resistors do.
If you have 10 in parallel without resistors, given sufficient available current, 9 will be dark and one will live a brief but spectacular existence. Then 8 will be dark and one will quickly overcurrent and die. Then 7. You get the idea.
9 in parallel with 1 ohm resistors will burn nearly 3 watts of power (2.79 watts).
9 in series with a 27 volt power supply would burn 90mW since 33mA into the circuit = 33mA out of the circuit. It's 33mA flowing, period, no matter how many LEDs you wire in series. Really you'll want a little head room on the supply and a series resistor with the right rating for whatever voltage drop you're going for.
-Bob

On Mon, Oct 5, 2015 at 8:22 PM, Sky Rocket Guy skyrocketguy@yahoo.com [B9Builders] wrote:

I want to connect 9 LEDs in parallel.
Each LED is rated at 3 volts and 100mw.
If I use a 3v switching power supply, is it still best to use resistors?
This wizard suggests to use at least 1 ohm resistors.
http://www.ledcalc.net/

Thoughts?
Thank you,Jeff

[Gregorio Padin]

Good morning.
Interesting question and I had to double check with the web to be more certain. As you may know placing something in series be it resistors, led, or inductors has the characteristic that it will see the same voltage. It is to my best understanding that since you are running the led at the rated voltage (3Vdc), in theory you do not need a resistor. If this were the case in which you had a higher voltage then you would need to reduce the voltage by adding a resistor.
Now, let us think that you want to go conservative and have the leds last longer than expected and you are willing to run these at 2.5VDC, then we would need to add a resistor to provide a voltage drop of 0.5 Vdc. The following better explains this scenario:The led is rated at 3Vdc and 100mAWith a voltage of 3Vdc and to run the leds at 2.5V (to extend the life), means that we need a resistor to provide a voltage drop of 0.5V.The value of the resistor is R= V / I or 0.5V / 20mA or 0.5 / 0.1 =  5 OhmsYou might want to do an experiment with a simple one led circuit, one with 3Vdc and another with 2.5Vdc (resistor included) to see what you prefer and see how long would it take to "burn out" (but I would not wait for the later )
I am certain there are others here that will correct me if this is incorrect, but hope this helps
Have a nice day!!!
From: "Sky Rocket Guy skyrocketguy@yahoo.com [B9Builders]"
To: "B9Builders@yahoogroups.com"
Sent: Monday, October 5, 2015 10:22 PM
Subject: [B9Builders] LED question

  I want to connect 9 LEDs in parallel.
Each LED is rated at 3 volts and 100mw.
If I use a 3v switching power supply, is it still best to use resistors?
This wizard suggests to use at least 1 ohm resistors.
http://www.ledcalc.net/

Thoughts?
Thank you,Jeff
#ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896 -- #ygrps-yiv-1963058776yiv0963239896ygrp-mkp { border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mkp hr { border:1px solid #d8d8d8;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mkp #ygrps-yiv-1963058776yiv0963239896hd { color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mkp #ygrps-yiv-1963058776yiv0963239896ads { margin-bottom:10px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mkp .ygrps-yiv-1963058776yiv0963239896ad { padding:0 0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mkp .ygrps-yiv-1963058776yiv0963239896ad p { margin:0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mkp .ygrps-yiv-1963058776yiv0963239896ad a { color:#0000ff;text-decoration:none;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-sponsor #ygrps-yiv-1963058776yiv0963239896ygrp-lc { font-family:Arial;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-sponsor #ygrps-yiv-1963058776yiv0963239896ygrp-lc #ygrps-yiv-1963058776yiv0963239896hd { margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-sponsor #ygrps-yiv-1963058776yiv0963239896ygrp-lc .ygrps-yiv-1963058776yiv0963239896ad { margin-bottom:10px;padding:0 0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896actions { font-family:Verdana;font-size:11px;padding:10px 0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896activity { background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896activity span { font-weight:700;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896activity span:first-child { text-transform:uppercase;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896activity span a { color:#5085b6;text-decoration:none;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896activity span span { color:#ff7900;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896activity span .ygrps-yiv-1963058776yiv0963239896underline { text-decoration:underline;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896attach { clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896attach div a { text-decoration:none;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896attach img { border:none;padding-right:5px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896attach label { display:block;margin-bottom:5px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896attach label a { text-decoration:none;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 blockquote { margin:0 0 0 4px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896bold { font-family:Arial;font-size:13px;font-weight:700;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896bold a { text-decoration:none;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 dd.ygrps-yiv-1963058776yiv0963239896last p a { font-family:Verdana;font-weight:700;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 dd.ygrps-yiv-1963058776yiv0963239896last p span { margin-right:10px;font-family:Verdana;font-weight:700;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 dd.ygrps-yiv-1963058776yiv0963239896last p span.ygrps-yiv-1963058776yiv0963239896yshortcuts { margin-right:0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896attach-table div div a { text-decoration:none;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896attach-table { width:400px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896file-title a, #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896file-title a:active, #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896file-title a:hover, #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896file-title a:visited { text-decoration:none;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896photo-title a, #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896photo-title a:active, #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896photo-title a:hover, #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div.ygrps-yiv-1963058776yiv0963239896photo-title a:visited { text-decoration:none;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 div#ygrps-yiv-1963058776yiv0963239896ygrp-mlmsg #ygrps-yiv-1963058776yiv0963239896ygrp-msg p a span.ygrps-yiv-1963058776yiv0963239896yshortcuts { font-family:Verdana;font-size:10px;font-weight:normal;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896green { color:#628c2a;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896MsoNormal { margin:0 0 0 0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 o { font-size:0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896photos div { float:left;width:72px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896photos div div { border:1px solid #666666;height:62px;overflow:hidden;width:62px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896photos div label { color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896reco-category { font-size:77%;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896reco-desc { font-size:77%;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 .ygrps-yiv-1963058776yiv0963239896replbq { margin:4px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-actbar div a:first-child { margin-right:2px;padding-right:5px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mlmsg { font-size:13px;font-family:Arial, helvetica, clean, sans-serif;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mlmsg table { font-size:inherit;font:100%;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mlmsg select, #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 input, #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 textarea { font:99% Arial, Helvetica, clean, sans-serif;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mlmsg pre, #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 code { font:115% monospace;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mlmsg * { line-height:1.22em;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-mlmsg #ygrps-yiv-1963058776yiv0963239896logo { padding-bottom:10px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-msg p a { font-family:Verdana;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-msg p#ygrps-yiv-1963058776yiv0963239896attach-count span { color:#1E66AE;font-weight:700;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-reco #ygrps-yiv-1963058776yiv0963239896reco-head { color:#ff7900;font-weight:700;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-reco { margin-bottom:20px;padding:0px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-sponsor #ygrps-yiv-1963058776yiv0963239896ov li a { font-size:130%;text-decoration:none;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-sponsor #ygrps-yiv-1963058776yiv0963239896ov li { font-size:77%;list-style-type:square;padding:6px 0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-sponsor #ygrps-yiv-1963058776yiv0963239896ov ul { margin:0;padding:0 0 0 8px;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-text { font-family:Georgia;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-text p { margin:0 0 1em 0;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-text tt { font-size:120%;} #ygrps-yiv-1963058776 #ygrps-yiv-1963058776yiv0963239896 #ygrps-yiv-1963058776yiv0963239896ygrp-vital ul li:last-child { border-right:none !important;} #ygrps-yiv-1963058776

[Herb]

Here is a good article which will hopefully answer your question and show you how to calculate the resistor values you need. 
http://www.quickar.com/ledbasics.htm
Herb
Sent from my iPad

On Oct 5, 2015, at 10:25 PM, Sky Rocket Guy skyrocketguy@yahoo.com [B9Builders] wrote:

 







I want to connect 9 LEDs in parallel.
Each LED is rated at 3 volts and 100mw.
If I use a 3v switching power supply, is it still best to use resistors?
This wizard suggests to use at least 1 ohm resistors.
http://www.ledcalc.net/

Thoughts?
Thank you,Jeff

[Bob Darlington]

Make that 900mW, not 90mW. I didn't catch my typo last night.
-Bob

On Mon, Oct 5, 2015 at 10:43 PM, Bob Darlington wrote:
You absolutely must use resistors when paralleling LEDs. LEDs are current devices. The more current, the more light produced -to a point. They will not do much in the way of restricting the amount of current through them. That's what resistors do.
If you have 10 in parallel without resistors, given sufficient available current, 9 will be dark and one will live a brief but spectacular existence. Then 8 will be dark and one will quickly overcurrent and die. Then 7. You get the idea.
9 in parallel with 1 ohm resistors will burn nearly 3 watts of power (2.79 watts).
9 in series with a 27 volt power supply would burn 90mW since 33mA into the circuit = 33mA out of the circuit. It's 33mA flowing, period, no matter how many LEDs you wire in series. Really you'll want a little head room on the supply and a series resistor with the right rating for whatever voltage drop you're going for.
-Bob
On Mon, Oct 5, 2015 at 8:22 PM, Sky Rocket Guy skyrocketguy@yahoo.com [B9Builders] wrote:

I want to connect 9 LEDs in parallel.
Each LED is rated at 3 volts and 100mw.
If I use a 3v switching power supply, is it still best to use resistors?
This wizard suggests to use at least 1 ohm resistors.
http://www.ledcalc.net/

Thoughts?
Thank you,Jeff