Bolts

[Roger Furneaux]

hi Bob - many thanx for your efforts on the MPJG, which supplement mine! The thermostat is held to the water outlet pipe (that's what the parts list calls it, also known as an "elbow") by two STUDS, these are 32mm long, threads average 12 & 11mm on the samples I have. Early p/n X151/45, later CB1717, Abingdon spares p/n 3-131, Mad Metrics p/n XA019a. Thread 8x1.0mm of course. BTW I now have all the MPJG bolts which are 10mm but with 3/8" BSF heads (plus all the 8x1.0mm of course) Please send me the list as soon as finished. ocTagonal Greetings Roger Sunny Devon

>I have updated my list of MPJG engine bolts, it is now complete except for > the dimensions of the water bypass bolts. These bolt the water bypass to > the > thermostat housing. This is the same for TC and TD. I would be gratefull > for > this information in order to complete the list. The list now includes all > studs used. I will send the list as a Word 2000 .doc file to all on > request > when complete. Bob TA 0844 Wales UK 8C overcast.