questions, now guns nklr

[Horton Oliphant]

I can understand why acetone would be good. Why would brake cleaner be bad? Alan Henderson A13 sidehack Iowa

On 11/15/2011 1:04 PM, Jeff Saline wrote: > > If you are going to go with the welding do clean the area but do not use > brake cleaner. Acetone would be a good chemical to help get that area > clean. Allow the welder to do any metal removal/prep prior to welding. > > Best, > > Jeff Saline > [Non-text portions of this message have been removed]

[Jeff Saline]

On Wed, 16 Nov 2011 09:13:38 -0600 Horton Oliphant writes:

> I can understand why acetone would be good. Why would brake cleaner be

bad?

> Alan Henderson A13 sidehack Iowa

<><><><><><> <><><><><><> Alan, Some brake cleaners have a chemical in them that when heated, like in welding, creates phosgene gas. A little whiff will kill you or cause significant issues if breathed in. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650 . . ____________________________________________________________ Hyatt Summerfield Suites® All Suites Hotel with a Full Kitchen. Free Breakfast & Wi-Fi. Book Now http://thirdpartyoffers.juno.com/TGL3141/4ec3d5e8372cbee223st04vuc

[pdstreeter@mmm.com]

Jud asked:

>What third-world expedients might also serve to keep the speedo drive >from rotating?

How about drilling a hole and screwing in a short self-tapping screw? [Non-text portions of this message have been removed]