starter lockout switch - clutch handle, front brake light switch

[Brian Pierson]

What all off road pegs will fit a 2011 klr650? Sent from Yahoo! Mail on Android [Non-text portions of this message have been removed]

[E Hines]

If you have big feet the best pegs I have found are the Pivot Pegz. Expensive, but once you get used to them you will love them. ________________________________ From: Brian Pierson To: "DSN_KLR650@yahoogroups.com" DSN_KLR650@yahoogroups.com> Sent: Wed, August 24, 2011 1:45:18 PM Subject: [DSN_KLR650] Pegs? What all off road pegs will fit a 2011 klr650? Sent from Yahoo! Mail on Android [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

[Jeffrey]

I never had problems with any of the safety lockouts; the kickstand or clutch. I had a problem with the front brake light switch; getting dirt in it. There are two openings in it and you can just spray wd40 into those openings. Also, once one of the wires came off the front brake light switch. I guess I fall on the right side, and you guys fall on the left side. J#3

[Fred Hink]

There are two different model of Pivotpegz for the KLR. The Mark2 is the original wide footpeg and the new Mark3 is even wider and has just come out. You can see both of these footpegs on my parts pages under the KLR/Body section. Fred http://www.arrowheadmotorsports.com From: E Hines Sent: Wednesday, August 24, 2011 4:19 PM To: Brian Pierson ; DSN Subject: Re: [DSN_KLR650] Pegs? If you have big feet the best pegs I have found are the Pivot Pegz. Expensive, but once you get used to them you will love them. ________________________________ From: Brian Pierson To: "mailto:DSN_KLR650%40yahoogroups.com" Sent: Wed, August 24, 2011 1:45:18 PM Subject: [DSN_KLR650] Pegs? What all off road pegs will fit a 2011 klr650? Sent from Yahoo! Mail on Android [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]