old guys

[transalp 1]

All,   For the sake of us dial up folks, when replying to a post with a large attachment or embedded photo, please consider snipping the photo,etc... from the reply. Thanks!   eddie    

----- Original Message ----- [b]From:[/b] mac-doo@... [b]To: [/b]dsn_klr650@yahoogroups.com [b]Sent:[/b] 5/27/2010 11:01:27 PM [b]Subject:[/b] RE: [DSN_KLR650] Older guys on KLR's,and seat height! Steve thanks for the info,i just downloaded the photo so i could see it.so what i need to know from you is did this lower the seat height also as i think i was going to take it off the top,did this to the KLR i had a few years ago and while it did lower the seat height it was almost as uncomfortable as in the stock height. I think that when i cut it down from the top i cut into a harder foam area so there was not enough cushioning,just a guess as i have no way of confirming that.                                                     Thanks Stu. To: DSN_KLR650@yahoogroups.com From: chicobro@... Date: Thu, 27 May 2010 15:37:10 -0700 Subject: RE: [DSN_KLR650] Older guys on KLR's,and seat height! Hi Stu~ I just finished shaving the seat on my A19. Yesterday I tested it out and it turned out great! Took it out yesterday and it's the first time I've been able to ride farther than 10 miles without my tail bone hurtin' like crazy. Took three different sessions to get just the right amount of foam cut out from the underside of the seat. I ended up removing a block of foam 14" x 7" X 2 inches thick! I used an electric turkey knife to cut the foam. Stapled the cover back on (3 times) and got it right! Pulling the foam off the seat pan and removing foam from the underside left the seat looking stock until you sit on it and it's so much more comfortable. Hope this pic isn't too big............Steve stuart sullivan wrote: [quote]  Has anyone modified the stock seat?have friend who did his,another model of bike with a sander attachment on a drill,looks ok from what i saw.                                                      Thanks Stu.

[/quote]

[Sonny Bulla]

59 here (60 in Aug). Have an '02 KLR650 I bought new in '02. Also have an '80 KZ1000. Always tell people the KLR is "fun" to ride and the KZ is "exciting" to ride. Sonny

[clmccoy1]

+1 It would also be great if some of the duplication could be minimized when replying to a post by removing most of the forwarded text. I'm not on dial up, but I do try to read the email digests on my blackberry and many of the messages are so full of forwarded text (that I've already read or can read in the original message) that the blackberry truncates a significant portion of the following messages. Thanks also! CM

--- In DSN_KLR650@yahoogroups.com, "transalp 1" wrote: > > All, > > For the sake of us dial up folks, when replying to a post with a large attachment or embedded photo, please consider snipping the photo,etc... from the reply. > Thanks! > > eddie > >