horn installation

[transalp 1]

The rains subsided long enough to wire up the Stebel horn on the 09'. After removing the right side forward fairing panel, seat & fuel tank, I had easy access to everything. In lieu of removing the OEM horn, I opted to simply unplug the original wires and leave it in place. The OEM wires fit and fired the relay just fine. All that was left was to run a (+) from the relay to the horn and another (+) from the relay back to the battery. The (-) from the horn motor was connected directly to the battery. I took a moment to photograph the mounting location a bit better and provide some basic wiring explainations,too. They've been added to the Stebel photo folder. eddie [Non-text portions of this message have been removed]