looking for turn signal beeper

[Michael Martin]

OK, I posted the schematic in a photo album named Beeper. HTH, Mike Martin, Louisville, KY ________________________________ From: revmaaatin To: DSN_KLR650@yahoogroups.com Sent: Wednesday, May 20, 2009 1:21:11 AM Subject: [DSN_KLR650] Re: Looking for turn signal beeper

--- In DSN_KLR650@yahoogro ups.com, Michael Martin wrote: > > Craig, > > I had the same problem because the indicator lamp on my KLR isn't in my field of view unless I look downward. > > I installed a Radio Shack beeper with a diode from each front turn signal wire to power the beeper. I ran the ground for the beeper through a tiny normally closed relay I bought at Radio Shack. (Current draw for the beeper is quite small, so the smallest relay and diodes are sufficient.) I actuated the relay with a lead from the brake light circuit. > > The beeper functions when I actuate either turn signal, but it is silenced if I have the brake applied. This way I just have to hold the brake ON while I'm stopped at a light. As soon as I release the brake to ride away, the beeper sounds off to remind me to cancel the turn signal. > > HTH, > > Mike Martin, > Louisville, KY > Mike, That is some cool farkle. You should submit it to Kawasaki for factory insallation to their bikes. Would you consider putting that in a wiring diagram and place it in the photo's or submit it to the FAQ king? or perhaps, a kit for sale that is plug and play.... I'd buy one.... revmaaatin. [Non-text portions of this message have been removed]