making a rotor holder tool

[Jeff Saline]

Listers, OK Heads, Udder Heads, Some Craftsman Microtork torque wrenches are on sale on Friday and Saturday for $39.99. Their regular price is $79.99. This is the lowest I've ever seen for these torque wrenches. If you have been thinking about getting a torque wrench or two this is probably the best deal you'll ever on Craftsman torque wrenches. Model numbers are 44593/4/5 Ranges are: 25-250 in lbs., 10-75 ft lbs., 20-150 ft lbs. The two smaller ones are probably a very good combination as they complement each other well with nice overlap. The largest one is nice to have for items like the rotor bolt, counter shaft sprocket nut, axle nuts and rear suspension linkage fasteners on the KLR or final drive pinion nuts and transmission output flange nuts and maybe flywheel bolts on the airheads. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650, 79 R100RT ____________________________________________________________ Click here to find the perfect picture with our powerful photo search features. http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw1aBnMSd5LeLIJdvpwRaClCbRfhzId7PVSaCrnRhnLMWL9ac/

[Jeff Saline]

Listers, OK Heads, Udder Heads, On Thursday I posted a note letting folks know that some Craftsman Microtork torque wrenches were on sale on Friday and Saturday for $39.99. Just wanted to update that with the current sale info starting today for a week. You can now get them for the incredibly low price of $69.99 each and save a whopping $10. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650, 79 R100RT ____________________________________________________________ Easy-to-use, advanced features, flexible phone systems. Click here for more info. http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw34S6lAZ6sOwux3R3ESefvJ3JuppiWV5rhiYaCihdpZrYl5y/

[Lars Lemberg]

DualSportNews' KLR650 Discussion ListI use a 1-1/4in crows foot on a breaker bar to hold the rotor, it works fine. It's hard to find a lone economical 1-1/4 that is not part of a set, but I found one on eBay for U.S.$10. Lars in VA '06 Soylent Green

>Posted by: "Dooden" dooden@... Dooden >Sun Nov 30, 2008 5:19 am (PST) >Mention where you are, might be somebody close-by with the holder and >the puller bolt that might just let you use what they got. > >Might try just buying a crows foot for your ratchet, never tried but >seems like it would fit. > >Dooden >A15 Green Ape