zerk fittings in swingarm

DSN_KLR650
Post Reply
Kyle
Posts: 72
Joined: Tue Jul 22, 2003 9:40 pm

question, mefo tire vs kenda 270`s

Post by Kyle » Sat Mar 08, 2008 6:03 pm

I just recently just recieved a brand new Mefo rear tire. I can`t get a front? Hopefully someday. I was looking at the tire and I noticed that it was stamped "3-ply`s". Only 3 ply`s? How can a good tire that everybody raves about only have three ply`s? My Kenda 270 rear I have installed right now has 6 ply`s. If I remember right? I can`t help to think that the more ply`s a tire has, the better it would be? Less chance for a puncture too. I would like to hear some feedback, please. Thanks Kyle

Fred Hink
Posts: 2434
Joined: Thu Apr 06, 2000 10:08 am

question, mefo tire vs kenda 270`s

Post by Fred Hink » Sat Mar 08, 2008 7:20 pm

I thought the same thing the last time I bought tires for my 4x4 truck. The 2ply tires that came on the truck never gave me any trouble. The 3ply tires that I replaced them with was the only tires I ever put a rock through. The MEFO is a very stiff sidewall compared to the Kenda. There is lots more than the number of plys that make up a good tire. I just squeezed the sidewall on a new K270 and a new MEFO and there is a noticeable difference in stiffness in favor of the MEFO. Some people like the Kenda but I think it's selling point is it's price. The selling point on the MEFO is it's performance. I have most all MEFO tires in stock and should have the 21" MEFO in about three weeks. Fred http://www.arrowheadmotorsports.com http://s1.zetaboards.com/arrowhead
----- Original Message ----- From: Kyle To: DSN_KLR650@yahoogroups.com Sent: Saturday, March 08, 2008 5:03 PM Subject: [DSN_KLR650] Question, Mefo Tire vs Kenda 270`s I just recently just recieved a brand new Mefo rear tire. I can`t get a front? Hopefully someday. I was looking at the tire and I noticed that it was stamped "3-ply`s". Only 3 ply`s? How can a good tire that everybody raves about only have three ply`s? My Kenda 270 rear I have installed right now has 6 ply`s. If I remember right? I can`t help to think that the more ply`s a tire has, the better it would be? Less chance for a puncture too. I would like to hear some feedback, please. Thanks Kyle [Non-text portions of this message have been removed]

andykisz
Posts: 20
Joined: Wed Nov 14, 2007 2:20 pm

zerk fittings in swingarm

Post by andykisz » Sun Mar 09, 2008 6:37 pm

Go to this sight and scroll down to the appropriate article. Bill is very thorough and if he says it works you can count on it. http://www.xanga.com/watt_man

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests