non-cog, nklr - wanted minolta tele-extender
- 
				Brad Davis
 - Posts: 496
 - Joined: Fri Apr 28, 2000 8:06 am
 
tread depth
The manual says that 2mm is the minimum tread depth
 before the tire should be replaced. What do most of
 you guys let your tire wear to before a new one is
 installed? My rear Kings 967 is at 4mm @4000 miles so
 I need to start thinking about a replacement I guess.
 
 Brad
 
 
 __________________________________________________
 Do You Yahoo!?
 Get personalized email addresses from Yahoo! Mail
 http://personal.mail.yahoo.com/
			
			
									
									
						- 
				RM
 - Posts: 1977
 - Joined: Tue May 09, 2000 7:20 pm
 
tread depth
On Tue, 10 Jul 2001, Brad Davis wrote:
 
 
			
			
									
									
						This one was just getting broken in. I changed it early: http://albums.photopoint.com/j/View?u=1595966&a=12825461&p=47915284>The manual says that 2mm is the minimum tread depth before the tire >should be replaced. What do most of you guys let your tire wear to >before a new one is installed? My rear Kings 967 is at 4mm @4000 miles >so I need to start thinking about a replacement I guess.
- 
				Dale Johnson
 - Posts: 413
 - Joined: Wed Apr 12, 2000 10:04 am
 
tread depth
I usually wait till it's BALD..
 
 Dale
 Y2K KLR with 29200 miles
 
			
			
									
									
						--- In DSN_klr650@y..., Brad Davis wrote: > > The manual says that 2mm is the minimum tread depth > before the tire should be replaced. What do most of > you guys let your tire wear to before a new one is > installed? My rear Kings 967 is at 4mm @4000 miles so > I need to start thinking about a replacement I guess.
- 
				RM
 - Posts: 1977
 - Joined: Tue May 09, 2000 7:20 pm
 
tread depth
On Tue, 10 Jul 2001, Dale Johnson wrote:
 
 
			
			
									
									
						"Worn-out" is only a state of mind - it's a very subjective thing.>I usually wait till it's BALD..
- 
				squidwannabe@hotmail.com
 - Posts: 262
 - Joined: Wed Mar 21, 2001 3:56 pm
 
tread depth
If you are a cheap ass, change it when it's bald. I would rather have 
 peace of mind knowing I can ride in the rain much safer.
 
 
			
			
									
									
						--- In DSN_klr650@y..., Brad Davis wrote: > > The manual says that 2mm is the minimum tread depth > before the tire should be replaced. What do most of > you guys let your tire wear to before a new one is > installed? My rear Kings 967 is at 4mm @4000 miles so > I need to start thinking about a replacement I guess. > > Brad > > > __________________________________________________ > Do You Yahoo!? > Get personalized email addresses from Yahoo! Mail > http://personal.mail.yahoo.com/
- 
				Dale Johnson
 - Posts: 413
 - Joined: Wed Apr 12, 2000 10:04 am
 
tread depth
--- In DSN_klr650@y..., squidwannabe@h... wrote:
 
			
			
									
									
						have> If you are a cheap ass, change it when it's bald. I would rather
Rain? whats that? Dale in SO CAL!> peace of mind knowing I can ride in the rain much safer. >
- 
				Dreas Nielsen
 - Posts: 111
 - Joined: Fri Apr 14, 2000 10:57 pm
 
tread depth
I'll let the rear get considerably less than that, but don't let the front
 get under 2 mm.
 
 Yesterday I replaced my rear K750 (the third on this bike) and the tread
 depth in the center of the tire was just a bit under 1 mm after 6,970 miles.
 
 Dreas Nielsen
 
 
 
			
			
									
									
						> -----Original Message----- > From: Brad Davis [mailto:bradcdavis@...] > Sent: Tuesday, July 10, 2001 11:56 AM > To: KLR DSN List > Subject: [DSN_klr650] Tread Depth > > > > The manual says that 2mm is the minimum tread depth > before the tire should be replaced. What do most of > you guys let your tire wear to before a new one is > installed? My rear Kings 967 is at 4mm @4000 miles so > I need to start thinking about a replacement I guess. > > Brad > > > __________________________________________________ > Do You Yahoo!? > Get personalized email addresses from Yahoo! Mail > http://personal.mail.yahoo.com/ > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > > Post message: DSN_klr650@yahoogroups.com > Subscribe: DSN_klr650-subscribe@yahoogroups.com > Unsubscribe: DSN_klr650-unsubscribe@yahoogroups.com > List owner: DSN_klr650-owner@yahoogroups.com > > Support Dual Sport News by subscribing at: > http://www.dualsportnews.com > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
- 
				Guest
 
tread depth
Before change it you make some burnout until you see the cord...or until it
 blow if you want
 
 
			
			
									
									
						----- Original Message ----- From: "Brad Davis" To: "KLR DSN List" DSN_klr650@yahoogroups.com> Sent: Tuesday, July 10, 2001 2:55 PM Subject: [DSN_klr650] Tread Depth > > The manual says that 2mm is the minimum tread depth > before the tire should be replaced. What do most of > you guys let your tire wear to before a new one is > installed? My rear Kings 967 is at 4mm @4000 miles so > I need to start thinking about a replacement I guess. > > Brad > > > __________________________________________________ > Do You Yahoo!? > Get personalized email addresses from Yahoo! Mail > http://personal.mail.yahoo.com/ > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > > Post message: DSN_klr650@yahoogroups.com > Subscribe: DSN_klr650-subscribe@yahoogroups.com > Unsubscribe: DSN_klr650-unsubscribe@yahoogroups.com > List owner: DSN_klr650-owner@yahoogroups.com > > Support Dual Sport News by subscribing at: > http://www.dualsportnews.com > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >
- 
				Brad Davis
 - Posts: 496
 - Joined: Fri Apr 28, 2000 8:06 am
 
tread depth
Dreas,
 Thanks. Why would you let the rear wear more than the
 front?
 Brad
 
 --- Dreas Nielsen  wrote:
 
			
			
									
									
						__________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/> I'll let the rear get considerably less than that, > but don't let the front > get under 2 mm. > > Yesterday I replaced my rear K750 (the third on this > bike) and the tread > depth in the center of the tire was just a bit under > 1 mm after 6,970 miles. > > Dreas Nielsen >
- 
				Brad Davis
 - Posts: 496
 - Joined: Fri Apr 28, 2000 8:06 am
 
tread depth
Yeah.....right.....whatever you say....
 
 --- Pierre Fortier  wrote:
 
			
			
									
									
						__________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/> Before change it you make some burnout until you see > the cord...or until it > blow if you want
Who is online
Users browsing this forum: No registered users and 52 guests