dyno - same samo for most

[elblody]

I am in the process of converting my KLR front end to DRZ and I need a lower triple clamp with stem to start the process and keep riding. Need to borrow or buy a used one soon !!!!! happy riding Alf A14 VRF800

[Mike Torst]

Agreed. A Quiet bike that makes HP is better than one that is loud. Mike Torst Las Vegas

> -----Original Message----- > From: Judson D. Jones [mailto:judjonzz@...] > Sent: Saturday, March 27, 2004 9:36 PM > To: DSN_klr650@yahoogroups.com > Subject: [DSN_klr650] Re: dyno - samo samo for most > > --- In DSN_klr650@yahoogroups.com, "Mike Torst" wrote: > > Brad, you are NOT aware of the many years of Dyno data and the FACT that > > most efforts fail to do the do - THE KLR650 ports are the issue. I have > > stated it so many times. > > > > > > Many Dyno runs have been done, and, just like your link, almost all the > > same. $$$$ in and little out. > > Of course, If you port it, you prolly need a cam to take full advantage, > in > addition to the antisocial exhaust. The picture I have is dollar signs > with wings > on them, flying off into the sunset. > > Just thinking about it all makes me feel like an old wet blanket. I hope > there > are still some kids around who can throw some money and ingenuity at their > bikes and use them to annoy their elders. Better that than megaphones and > spoilers on easter-egg colored Civics, just as long as they stay inside > the > urban beltways, and don't jeopardize any more off-road areas. >