[dsn_klr650] torque spec for 'stat housing?

[steve secrest]

Brad, go to a locksmith. It's funny to see your request as I'm a locksmith and just made a copy of my KLR key about a half hour ago!

----- Original Message ----- From: "Brad Davis" To: DSN_klr650@egroups.com> Sent: Monday, July 17, 2000 4:21 PM Subject: [DSN_klr650] Spare Ignition Key > Has anyone been successful in getting a key made for > their KLR? I suppose the dealer has them but that's > quite a drive for me. Ace Hardware, Home Depot and the > car parts places don't carry bike keys in my area. > Please let me know where you were able to get one made > if other than the dealer. > > Thanks alot! > > Brad > North Carolina > A9 > > __________________________________________________ > Do You Yahoo!? > Get Yahoo! Mail - Free email you can access from anywhere! > http://mail.yahoo.com/ > > ------------------------------------------------------------------------ > Get a NextCard Visa, in 30 seconds! > 1. Fill in the brief application > 2. Receive approval decision within 30 seconds > 3. Get rates as low as 2.9% Intro or 9.9% Fixed APR > http://click.egroups.com/1/6630/6/_/911801/_/963865267/ > ------------------------------------------------------------------------ > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > Support Dual Sport News... dsneditor@... > Let's keep this list SPAM free! > > Visit our site at http://www.egroups.com/group/DSN_klr650 > To unsubscribe from this group, send an email to: > DSN_klr650-unsubscribe@egroups.com > >

[steve secrest]

I doubt if I could get through to them then ... just remember their desire to please you if you ever need a lot of lockwork done. Check the archives for info on other blanks that can be subbed ... there's a few common that they're bound to have. Steve in Cincinnati

----- Original Message ----- From: "Steve Anderson" To: DSN_klr650@egroups.com> Sent: Monday, July 17, 2000 8:06 PM Subject: [DSN_klr650] Re: Spare Ignition Key > Steve, > > You need to talk to my local locksmiths. I went to three, and got the same > story, they couldn't (wouldn't?) get the blanks. > > > Steve A. > > > > > > --- In DSN_klr650@egroups.com, "Steve Secrest" wrote: > > Brad, go to a locksmith. It's funny to see your request as I'm a locksmith > > and > > just made a copy of my KLR key about a half hour ago! > > > > > > ----- Original Message ----- > > From: "Brad Davis" > > To: DSN_klr650@egroups.com> > > Sent: Monday, July 17, 2000 4:21 PM > > Subject: [DSN_klr650] Spare Ignition Key > > > > > > > Has anyone been successful in getting a key made for > > > their KLR? I suppose the dealer has them but that's > > > quite a drive for me. Ace Hardware, Home Depot and the > > > car parts places don't carry bike keys in my area. > > > Please let me know where you were able to get one made > > > if other than the dealer. > > > > > > Thanks alot! > > > > > > Brad > > > North Carolina > > > A9 > > > > > > ------------------------------------------------------------------------ > Get a NextCard Visa, in 30 seconds! > 1. Fill in the brief application > 2. Receive approval decision within 30 seconds > 3. Get rates as low as 2.9% Intro or 9.9% Fixed APR > http://click.egroups.com/1/6630/6/_/911801/_/963879390/ > ------------------------------------------------------------------------ > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > Support Dual Sport News... dsneditor@... > Let's keep this list SPAM free! > > Visit our site at http://www.egroups.com/group/DSN_klr650 > To unsubscribe from this group, send an email to: > DSN_klr650-unsubscribe@egroups.com > >

[steve secrest]

Thanks for posting the link Jim ... I was just looking for it and here's the info you fellas need. I ripped this from Eric's site (hope it's OK) This will get ya going on finding a spare. From Eric: KLR Key Blanks So you're not one of those nice little RUB-types? You don't want to pay over $10 for a key blank? Here is a listing of key blanks that will work for the KLR. Please note I can only speak for the blank I use, the rest were provided by others on the KLR list. I suggest taking the complete list of possibilities to your key shop, and let them decide which blank will work best for you. Curtis SU-9 Suzuki blank - Oh, this one's from me! Curtis YM-58 blank - Thanks Raymond! Ford 5 cut primary blank - Thanks Bill! ILCO KA15 X106 - Thanks Bryan! ILCO YH38 X77 - Thanks Sarah! ILCO X120 YH46 - Thanks Tom!

----- Original Message ----- From: "Jim Hyman" To: DSN_klr650@egroups.com> Sent: Monday, July 17, 2000 8:41 PM Subject: [DSN_klr650] Re: Spare Ignition Key > Brad, > > Go to Eric J's website > > http://www.angelfire.com/ga/ericjazz/frMaster.html > > to get a list of key blanks that fit the KLR. My local > locksmith re-keyed my ignition switch to match the gas cap > lock & helmet holder lock for $20 (including 2 spares). > My new keyblank is 'Silca KW 8'. > > Professor A9 Federal Way, Wa. [USA] > > ---------------------------------------- > --- Brad Davis wrote: > > > Has anyone been successful in getting a key made for > > their KLR? I suppose the dealer has them but that's > > quite a drive for me. Ace Hardware, Home Depot and the > > car parts places don't carry bike keys in my area. > > Please let me know where you were able to get one made > > if other than the dealer. > > > > ------------------------------------------------------------------------ > Get a NextCard Visa, in 30 seconds! > 1. Fill in the brief application > 2. Receive approval decision within 30 seconds > 3. Get rates as low as 2.9% Intro or 9.9% Fixed APR > http://click.egroups.com/1/6630/6/_/911801/_/963880920/ > ------------------------------------------------------------------------ > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > Support Dual Sport News... dsneditor@... > Let's keep this list SPAM free! > > Visit our site at http://www.egroups.com/group/DSN_klr650 > To unsubscribe from this group, send an email to: > DSN_klr650-unsubscribe@egroups.com > >

[Dash Weeks]

At 05:06 PM 7/17/2000 -0700, Steve Anderson wrote:

>Steve, > >You need to talk to my local locksmiths. I went to three, and got the same >story, they couldn't (wouldn't?) get the blanks. > > >Steve A.

You can buy the blanks for any Kawi Dealer. I got mine from Point Cycle in Pittsburgh (how'd you guess). Anyway there are two, a left and a right (the direction of the jog) so be sure to get the right one. The picture in the parts manual was opposite of what I expected. The picture shows the cross-section as if you were looking at it from the point rather than from the Fob Hole. They are expensive though... Like $8.50 for a blank. Then take the blank to a local cutter and have one cut. LaterZ Dash

[Dash Weeks]

> > > >Are you implying that Point Cycle in Pittsburgh will take an >order by phone and then mail it out? If that is the case then >if he has the original key it should have a key code number >on it. He should be able to give them the code and have >them supply the key already cut. > >Walt >A14

I don't know about already cut, but if you call them they will gladly take your credit card # and send you parts quickly. Glenn and Doug are both excellent people to deal with, very friendly, never too busy (though they are always swamped) and best of all, their prices are the best that I have found from any Kawi Dealer. LaterZ Dash

[steve secrest]

Are you serious ... 8.50 for a blank??? These are 2.50 already cut in the shop where I work. And the reason they're 2.50 is they get cut on both sides.

----- Original Message ----- From: "Dash Weeks" To: DSN_klr650@egroups.com> Sent: Tuesday, July 18, 2000 10:18 AM Subject: Re: [DSN_klr650] Re: Spare Ignition Key > At 05:06 PM 7/17/2000 -0700, Steve Anderson wrote: > >Steve, > > > >You need to talk to my local locksmiths. I went to three, and got the same > >story, they couldn't (wouldn't?) get the blanks. > > > > > >Steve A. > > You can buy the blanks for any Kawi Dealer. I got mine from Point Cycle in > Pittsburgh (how'd you guess). Anyway there are two, a left and a right > (the direction of the jog) so be sure to get the right one. The picture in > the parts manual was opposite of what I expected. The picture shows the > cross-section as if you were looking at it from the point rather than from > the Fob Hole. They are expensive though... Like $8.50 for a blank. Then > take the blank to a local cutter and have one cut. > > LaterZ > Dash > > > ------------------------------------------------------------------------ > Special Offer-Earn 300 Points from MyPoints.com for trying @Backup > Get automatic protection and access to your important computer files. > Install today: > http://click.egroups.com/1/6347/6/_/911801/_/963929915/ > ------------------------------------------------------------------------ > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > Support Dual Sport News... dsneditor@... > Let's keep this list SPAM free! > > Visit our site at http://www.egroups.com/group/DSN_klr650 > To unsubscribe from this group, send an email to: > DSN_klr650-unsubscribe@egroups.com > >

[Dash Weeks]

At 12:53 PM 7/18/2000 -0400, Steve Secrest wrote:

>Are you serious ... 8.50 for a blank??? These are 2.50 already cut in the >shop where I work. And the reason they're 2.50 is they get cut on both >sides.

Hi Steve, Is that $2.50 for a Kawi Key or for a generic blank that happens to match? If the first then expect a whole bunch of business. Oh and yeah $8.50 per blank for a Kawi Blank, normal dealer price is over $10. Walt brought up a good point about getting them cut based on the code numbers. I never had an original, so I don't know my code. LaterZ Dash

[Arne]

-----Original Message----- From: "Brad Davis" Subject: [DSN_klr650] Spare Ignition Key

> Has anyone been successful in getting a key made for > their KLR?

From: Steve Secrest [mailto:ssecrest@...] Subject: Re: [DSN_klr650] Spare Ignition Key Brad, go to a locksmith. It's funny to see your request as I'm a locksmith and just made a copy of my KLR key about a half hour ago! _________________________________ Both you guys... If Eric Jazz's website is still up and running, he compiled a whole list of key blanks that would work with the Kawi KLR key. O.K... I'm being lazy... I found it. Actually, here it is: =) KLR Key Blanks So you're not one of those nice little RUB-types? You don't want to pay over $10 for a key blank? Here is a listing of key blanks that will work for the KLR. Please note I can only speak for the blank I use, the rest were provided by others on the KLR list. I suggest taking the complete list of possibilities to your key shop, and let them decide which blank will work best for you. Curtis SU-9 Suzuki blank - Oh, this one's from me! Curtis YM-58 blank - Thanks Raymond! Ford 5 cut primary blank - Thanks Bill! ILCO KA15 X106 - Thanks Bryan! ILCO YH38 X77 - Thanks Sarah! ILCO X120 YH46 - Thanks Tom! But check out Eric's site anyways. It's good. http://www.angelfire.com/ga/ericjazz/index.html Cheers, Arne

[Arne]

-----Original Message----- From: Steve Secrest [mailto:ssecrest@...] Sent: July 18, 2000 9:54 AM To: DSN_klr650@egroups.com Subject: Re: [DSN_klr650] Re: Spare Ignition Key Are you serious ... 8.50 for a blank??? These are 2.50 already cut in the shop where I work. And the reason they're 2.50 is they get cut on both sides. _____________ Like almost everything else "Kawasaki"... AAARRRGGHHH!!! Arne

[Mark Wilson]

> Are you serious ... 8.50 for a blank??? These are 2.50 already cut in the > shop where I work. And the reason they're 2.50 is they get cut on both > sides. > _____________ > > Like almost everything else "Kawasaki"... AAARRRGGHHH!!! > > Arne

Shoot, thats more like a BMW key price right there. The key must be a BMW part. Mark