Page 1 of 1
Mallory Dual Point Ignition
Posted: Wed Jun 22, 2005 5:54 am
by Leinen, Robert
When I purchased my TC, it already had a Mallory dual point distributor
installed. Unfortunately, there were no instruction/owners manuals on
the Mallory system.
Any suggestions on how or where I can pick up instructional material.
Does anyone know if the point settings are the same with the Mallory as
the original distributor on the TC?
Thanks,
Bob Leinen
[Non-text portions of this message have been removed]
Re: Mallory Dual Point Ignition
Posted: Wed Jun 22, 2005 6:07 am
by Gene Gillam
Bob asked:
>Any suggestions on how or where I can pick up instructional material.
Does anyone know if the point settings are the same with the Mallory as
the original distributor on the TC?http://www.centuryperformance.com/point_settings.asp
for your point settings.
Best,
Gene Gillam
Saucier, MS
Re: Mallory Dual Point Ignition
Posted: Wed Jun 22, 2005 5:37 pm
by Skip Kelsey
Bob:
Depending on which Mallory you have, most are set at .022 on each set of
points.
I have been running an old period Mallory "long neck" dist for about twenty
years. It works great. Only thing that has gone wrong is I have had a
couple of condensers go bad.
Cheers:
Skip Kelsey.............................................................
At 09:00 AM 6/22/2005 -0400, Leinen, Robert wrote:
>When I purchased my TC, it already had a Mallory dual point distributor
>installed. Unfortunately, there were no instruction/owners manuals on
>the Mallory system.
>
>
>
>Any suggestions on how or where I can pick up instructional material.
>Does anyone know if the point settings are the same with the Mallory as
>the original distributor on the TC?
>
>
>
>Thanks,
>
>
>
>Bob Leinen
>
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
Re: Mallory Dual Point Ignition
Posted: Wed Jun 22, 2005 8:47 pm
by John Seim
Mallory has been bought out by the Mr. Gasket Company. You can go to the
website www.mrgasket.com> and click on the Mallory button to get to the
Mallory page, and possibly some tech help from them.
John Seim
Irvine, CA
>
>At 09:00 AM 6/22/2005 -0400, Leinen, Robert wrote:
>
>
>>When I purchased my TC, it already had a Mallory dual point distributor
>>installed. Unfortunately, there were no instruction/owners manuals on
>>the Mallory system.
>>
>>
>>
>>Any suggestions on how or where I can pick up instructional material.
>>Does anyone know if the point settings are the same with the Mallory as
>>the original distributor on the TC?
>>
>>
>>
>>Thanks,
>>
>>
>>
>>Bob Leinen
>>
>>