un-noisy horn
Posted: Tue Jun 07, 2005 1:08 pm
Peter;
I ll buy you a beer if you will tell me the secret of having a loud horn.
My home model 1949 MG-TC horn makes a low sound that can be heard for
least 6 to 7 feet with the engine off. Want to trade?
Seriously, can someone tell me (us) how to test and adjust the volume of a
Lucas HF 1234 horn; or is the horn just worn out?
Bruce Knipe
MG-TC 7976
__________________________________________
>From: "Chris and Tom Rutledge" rutledgetc@hotmail.com> >To: mgtc@comcast.net, mg-tabc@yahoogroups.com >Subject: [mg-tabc] noisy horn >Date: Tue, 07 Jun 2005 14:06:40 -0400 > >Hey Troop: Pardon please, the off subject question which follows, but I >don't know who else to ask. Over the winter, I built a pedal car Bugatti >for my granddaughter, and it's been a great success, especially the horn >sourced from the Moped supplier. The horn looks great on the badge bar, >very vintage in appearance, but it surely is loud. Will a resistor in the >(12V battery) power supply line tone down the volume? If not, what ideas >(beside earmuffs)? Tom Rutledge, Birminngham, Mi., USA TC 0535 > > >From: "Peter Roberts" mgtc@comcast.net> > >To: mg-tabc@yahoogroups.com> > >Subject: [mg-tabc] Brake bleeding > >Date: Mon, 6 Jun 2005 10:37:33 -0400 > > > >Hi Folks! > > > >I am still working on my brake mystery and thought I would pass along >some > >good news. > > > >For those who have yet to become acquainted with the trials of one man > >brake > >bleeding, let me introduce Speed Bleeder. They are well known to the > >racing > >community, but new to me. > > > >Speed Bleeders replace the bleed screws in your wheel cylinders. The are > >built with a ball and spring mechanism that provides a one-way valve. >Open > >them a quarter turn with no concern for allowing air to bleed back into >the > >system. Thus, you can get behind the wheel and push the brake pedal >without > >the need for a Trusted Assistant to open and close the bleed screw. > > > >On TC 0604 the correct size to order is 7/16 X 20 for the front >cylinders, > >and 5/16 X 24 for the rears. Go to www.speedbleeder.com for details. >They > >are nice folks and very helpful. > > > >Gosh, it is a pleasure to recommend a good product, even though I have no > >connection with the outfit. > > > >_Peter > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > >