Page 1 of 1
Re: information wanted Ashframes International
Posted: Tue Mar 01, 2005 1:58 am
by Clive Sherriff
We currently have a TA rebuild going on with a new frame
from Ashframe International in the workshop here.
It is a nice job and I have had no problems with it.
John and Fergus are a nice pair and they seem to
work to the timescales they promise.
They are at
ASHFRAME INTERNATIONAL +44 (0) 191-230-1930
(JOHN DUNCAN and FERGUS DUNCAN)
105 BACK NEW BRIDGE ST
NEWCASTLE UPON TYNE
NE1 2TY
Regards
Clive
===========================================
----- Original Message -----
From: "1939mgtb" 1939mgtb@comcast.net>
To: "mgtabc" mg-tabc@yahoogroups.com>
Sent: Wednesday, February 23, 2005 2:26 PM
Subject: [mg-tabc] information wanted
>
> Does anyone have contact information for 'Ashframe International' in the
UK?
> Hiro was kind enough to pass along the name, but I am unable to come up
with any contact info.
> Best,
> Ray
>
Re: information wanted Ashframes International
Posted: Sun Mar 06, 2005 4:25 pm
by David Lodge
Hello Clive,
But are the Bros. Duncan still using Phillps screws to fasten the
ash together?
Regards, David Lodge
----- ORIGINAL MESSAGE -----
From: "Clive Sherriff" clive.sherriff@ntlworld.com>
To: "mgtabc" mg-tabc@yahoogroups.com>,"1939mgtb"
1939mgtb@comcast.net> Subject: Re: [mg-tabc] information wanted
Ashframes
Date: 1.3.2005 - 10:59:21
>
> We currently have a TA rebuild going on with a new
> frame
> from Ashframe International in the workshop here.
>
> It is a nice job and I have had no problems with it.
>
> John and Fergus are a nice pair and they seem to
> work to the timescales they promise.
>
> They are at
>
> ASHFRAME INTERNATIONAL +44 (0) 191-230-1930
> (JOHN DUNCAN and FERGUS DUNCAN)
>
> 105 BACK NEW BRIDGE ST
> NEWCASTLE UPON TYNE
> NE1 2TY
>
> Regards
>
> Clive
>
> ===========================================
>
> ----- Original Message -----
> From: "1939mgtb" 1939mgtb@comcast.net>
> To: "mgtabc" mg-tabc@yahoogroups.com>
> Sent: Wednesday, February 23, 2005 2:26 PM
> Subject: [mg-tabc] information wanted
>
>
> >
>
> > Does anyone have contact information for 'Ashframe
> > International' in the
> UK?
> > Hiro was kind enough to pass along the name, but I am
> > unable to come up
> with any contact info.
> > Best,
> > Ray
> >
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
--
Akcni unorova nabidka "3 za cenu 1"! Ziskejte
VOLNY ADSL 512/128 3GB za cenu 1GB!
http://adsl.volny.cz
Re: information wanted Ashframes International
Posted: Wed Mar 09, 2005 2:13 am
by Roger Furneaux
Many years ago, when I rebuilt the ash frame of TC0978 myself, I used "off
the shelf" zinc plated slotted head screws. Just before repanelling, I
noticed some corrosion on the heads, and on taking them out, most were black
where the zinc had reacted with the acids or resins in the timber and (apart
from the pieces I replaced with laminated marine ply) this was the original
1946 wood. So I replaced every woodscrew with stainless! hopefully they will
be in perfect condition to remove easily during the next tub rebuild, which
is pencilled in for 2046....
ocTagonally
TCRoger
>But are the Bros. Duncan still using Phillps screws to fasten the
>ash together?
>
>Regards, David Lodge
Re: information wanted Ashframes International
Posted: Thu Mar 10, 2005 4:52 am
by 1939mgtb
I was under the impression that the screws were supposed to corrode slightly
to make sure they don't loosen. I know some guys have had problems with
stainless loosening....
This may be a non-problem, as most of the cars are not driven very often.
I don't know the answer...but someone out there with wood/coach-building
experience may.....
Best,
Ray
"Conlige suspectos semper habitos!"
----- Original Message -----
From: "Roger Furneaux" roger.46tc@virgin.net>
To: "David Lodge" archie_ponsonby@post.cz>
Cc: ".T-ABCs" mg-tabc@yahoogroups.com>
Sent: Tuesday, March 08, 2005 7:01 AM
Subject: Re: [mg-tabc] information wanted Ashframes International
>
> Many years ago, when I rebuilt the ash frame of TC0978 myself, I used "off
> the shelf" zinc plated slotted head screws. Just before repanelling, I
> noticed some corrosion on the heads, and on taking them out, most were
> black
> where the zinc had reacted with the acids or resins in the timber and
> (apart
> from the pieces I replaced with laminated marine ply) this was the
> original
> 1946 wood. So I replaced every woodscrew with stainless! hopefully they
> will
> be in perfect condition to remove easily during the next tub rebuild,
> which
> is pencilled in for 2046....
>
> ocTagonally
>
> TCRoger
>
>>But are the Bros. Duncan still using Phillps screws to fasten the
>>ash together?
>>
>>Regards, David Lodge
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Re: information wanted Ashframes International
Posted: Fri Mar 11, 2005 2:24 am
by Clive Sherriff
Sadly Yes
At least on the last one I saw
Clive
=====================================
----- Original Message -----
From: "David Lodge" archie_ponsonby@post.cz>
To: clive.sherriff@ntlworld.com>; mg-tabc@yahoogroups.com>;
1939mgtb@comcast.net>
Sent: Monday, March 07, 2005 12:25 AM
Subject: Re: [mg-tabc] information wanted Ashframes International
> Hello Clive,
>
> But are the Bros. Duncan still using Phillps screws to fasten the
> ash together?
>
> Regards, David Lodge
>
>
>
> ----- ORIGINAL MESSAGE -----
> From: "Clive Sherriff" clive.sherriff@ntlworld.com>
> To: "mgtabc" mg-tabc@yahoogroups.com>,"1939mgtb"
> 1939mgtb@comcast.net> Subject: Re: [mg-tabc] information wanted
> Ashframes
> Date: 1.3.2005 - 10:59:21
>
> >
> > We currently have a TA rebuild going on with a new
> > frame
> > from Ashframe International in the workshop here.
> >
> > It is a nice job and I have had no problems with it.
> >
> > John and Fergus are a nice pair and they seem to
> > work to the timescales they promise.
> >
> > They are at
> >
> > ASHFRAME INTERNATIONAL +44 (0) 191-230-1930
> > (JOHN DUNCAN and FERGUS DUNCAN)
> >
> > 105 BACK NEW BRIDGE ST
> > NEWCASTLE UPON TYNE
> > NE1 2TY
> >
> > Regards
> >
> > Clive
> >
> > ===========================================
> >
> > ----- Original Message -----
> > From: "1939mgtb" 1939mgtb@comcast.net>
> > To: "mgtabc" mg-tabc@yahoogroups.com>
> > Sent: Wednesday, February 23, 2005 2:26 PM
> > Subject: [mg-tabc] information wanted
> >
> >
> > >
> >
> > > Does anyone have contact information for 'Ashframe
> > > International' in the
> > UK?
> > > Hiro was kind enough to pass along the name, but I am
> > > unable to come up
> > with any contact info.
> > > Best,
> > > Ray
> > >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Akcni unorova nabidka "3 za cenu 1"! Ziskejte
> VOLNY ADSL 512/128 3GB za cenu 1GB!
>
http://adsl.volny.cz
>
>