HOLE IN CENTER OF ENGINE MOUNT BRACKET.

[Carlyle Merritt]

Did the MGTA engine bracket not have a rebound rubber? All rebound rubbers have a center rubber of 1 3/32 inch and my engine mount brackets for the TA have a 3/4 inch hole in the bracket. Maybe the TA lacked a rebound rubber? I could drill that hole to fit the rebound rubbers.

[Clive Sherriff]

Carlyle, The rebound rubber (S118/9) and associated bits, was introduced with the TB TB251 on. See MG TA TB Service Parts List, page 49. Makes sense to retro fit to the TAs though. CliveOxford, UK

On Thu, 20 Jun 2019 at 22:22, Carlyle Merritt carlyle@merritt-computer.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote: [u][/u] Did the MGTA engine bracket not have a rebound rubber? All rebound rubbers have a center rubber of 1 3/32 inch and my engine mount brackets for the TA have a 3/4 inch hole in the bracket. Maybe the TA lacked a rebound rubber? I could drill that hole to fit the rebound rubbers.