Headlight pots TA
Posted: Mon Jan 14, 2002 4:05 pm
Lee, Peter........
I have, as Peter has, used #8 stainless unslotted truss head screws, need 5,
to fasten the stalk bracket to the pot. They polish to a slight yellow tone
rather than the blue of chrome, so... who can see under there? There is the
need for a #6 truss head with a #3 head to hold the inner clip to the stalk
bracket so the stalk does not pivot.
This #6/3 head might work for the rivet on the top also.
These fasteners are available from Tioga Stainless, Box 565, Burlington VT
05402 and the owners are John & Mary McCabe at 802 655 9671. Real nice
folks.
Cheers!
Bill Hentzen