Page 1 of 1
Captive Nuts
Posted: Mon Apr 23, 2001 8:05 pm
by Mark Stolzenburg
Does anybody have a source of the captive nuts that fit on the driveshaft/propeller shaft tunnel? I need 4 of them. Thanks, Mark Stolzenburg
Stolzy40@peoplepc.com
Fw: [mg-tabc] Captive Nuts
Posted: Wed Apr 25, 2001 8:20 am
by Mark Stolzenburg
Several list members sent messages regarding the above subject and I thank them for their responses. Several also asked if I found a source to let them know. Well the source I found was Fred Kuntz at the Whitworth shop. I asked Fred if I could send the info to the list members and he agreed. So here's the notes, so everyone know what we are talking about! Thanks, Mark Stolzenburg PS. Badger sent me a note that said if I was looking for "Captive Nuts" to check the T-ABC Forever list - Right on Badger, I think we are all a little nuts, we probably have to be to work on the TC's
----- Original Message ----- [b]From:[/b]
fredkuntz@ncweb.com [b]To:[/b]
Stolzy40@peoplepc.com [b]Sent:[/b] Tuesday, April 24, 2001 9:00 PM [b]Subject:[/b] Re: [mg-tabc] Captive Nuts
Hi Mark: Okay, I can make those up for you.They are $1.00 ea.and are threaded 1/4-26 BSF. I don't have any in stock right now, but can make some up in a day or two. I suppose it's alright to mention on the list that I make these. Fred ----- Original Message ----- [b]From:[/b]
Stolzy40@peoplepc.com [b]To:[/b]
fredkuntz@ncweb.com [b]Sent:[/b] Tuesday, April 24, 2001 11:03 AM [b]Subject:[/b] Re: [mg-tabc] Captive Nuts
Fred, Yes, we are talking about the same "D" shaped nuts! Let me know how much they cost - I need 4 of them. BTW I've had a couple other people send me a note asking if I find a source to let them know. You don't mind if I put a message on the T-ABC List do you? You and Craig have a fantastic reputation with T restorers so I know you'll probably get lots more requests for "D" nuts!! Thanks, Mark Stolzenburg ----- Original Message ----- [b]From:[/b]
fredkuntz@ncweb.com [b]To:[/b]
stolzy40@peoplepc.com [b]Sent:[/b] Tuesday, April 24, 2001 8:47 AM [b]Subject:[/b] Re: [mg-tabc] Captive Nuts
Hi Mark: If these are the "D" shaped nuts that go along the sides for securing the floorboards,then I can make these up for you at the Whitworth Shop. Fred Kuntz TC 5087 The Whitworth Shop ----- Original Message ----- [b]From:[/b]
stolzy40@peoplepc.com [b]To:[/b]
mg-tabc@yahoogroups.com [b]Sent:[/b] Monday, April 23, 2001 11:05 PM [b]Subject:[/b] [mg-tabc] Captive Nuts
Does anybody have a source of the captive nuts that fit on the driveshaft/propeller shaft tunnel? I need 4 of them. Thanks, Mark Stolzenburg
Stolzy40@peoplepc.com
Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service.
captive nuts
Posted: Thu Sep 15, 2005 3:53 pm
by TMcNam4510@aol.com
The adventure continues..........TC 2850 is coming slowly along. The body
tub is my current focus and here is my question. There is a small
rectangular, metal plate located in the doors. They have a captive nut in each corner.
It is used to mount the plate used to hold the side curtain on. Mine are
missing all but 1 nut. I have found a plastic #10 nut that fits nicely but
would prefer the original type. Does any lister know where they can be had?
Thanks, Tom, TC2850
[Non-text portions of this message have been removed]
Captive nuts
Posted: Tue Oct 16, 2012 1:15 pm
by Chris
Where can I buy captive nuts for the foot-rest part of the firewall, and 1/4-26 square nut covers for the radiator? Picture 8 (pg. 13) of
http://ttypes.org/ttt2/pdf/TTT2-Issue8.pdf shows the covers.
Thanks,
Chris
Re: Captive nuts
Posted: Tue Oct 16, 2012 1:16 pm
by Koons, Robert A.
Attachments : If anybody has them, it’ll be Doug Pelton. Robert A. Koons, Jr. Drinker Biddle & Reath LLP Suite 2000 One Logan Square Philadelphia, PA 19103 Telephone: (215) 988-3392 Fax: (215) 988-2757
robert.koons@dbr.com [b]From:[/b]
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]Chris
[b]Sent:[/b] Tuesday, October 16, 2012 4:15 PM
[b]To:[/b]
mg-tabc@yahoogroups.com
[b]Subject:[/b] [mg-tabc] Captive nuts Where can I buy captive nuts for the foot-rest part of the firewall, and 1/4-26 square nut covers for the radiator? Picture 8 (pg. 13) of
http://ttypes.org/ttt2/pdf/TTT2-Issue8.pdf shows the covers.
Thanks,
Chris
**********************************
Disclaimer Required by IRS Rules of Practice: Any discussion of tax matters contained herein is not intended or written to be used, and cannot be used, for the purpose of avoiding any penalties that may be imposed under Federal tax laws.
**********************************
This message contains information which may be confidential and privileged. Unless you are the intended addressee (or authorized to receive for the intended addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender at Drinker Biddle & Reath LLP by reply e-mail and delete the message. Thank you very much.
***********************************
Re: Captive nuts
Posted: Tue Oct 16, 2012 9:11 pm
by John Seim
Abingdon Spares has them. The square nut and the metal surround are sold as one unit.
Page 23 of their catalog.
John Seim
Irvine, CA
On Oct 16, 2012, at 1:15 PM, Chris wrote:
> Where can I buy captive nuts for the foot-rest part of the firewall, and 1/4-26 square nut covers for the radiator? Picture 8 (pg. 13) of
http://ttypes.org/ttt2/pdf/TTT2-Issue8.pdf shows the covers.
>
> Thanks,
>
> Chris
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>