On Sep 11, 2013 1:41 PM, "Roger Furneaux" roger.46tc@virgin.net> wrote: [u][/u][u][/u] hi Guys - I am mystified, not by the SU pump leaks, but by the internet...Peter's reply to Mike's (presumably) 2nd. email, arrived FIRST. Not only that, but Mike's 1st. email (on the 9th.) never graced my inbox. In fact, there was only one email (from Steve Steirman) on the 9th. and none on the 8th. In addition, I am STILL not getting copies of emails sent to the list, which is why, when I remember, they are Cc. to myself. I believe this happens to others on this list, and also on another I belong to. Any ideas??? cheers Roger Devon ----- Original Message ----- [b]From:[/b] mke.castle@yahoo.com [b]To:[/b] pcoleuk@gmail.com [b]Cc:[/b] mg-tabc@yahoogroups.com [b]Sent:[/b] Monday, September 09, 2013 9:07 PM [b]Subject:[/b] Re: [mg-tabc] Fuel Pump A die cast pump, It's hard to tell exactly where the leaks coming from but seems to be from the gasket flange and not the diaphram side. [b]From:[/b] Peter Cole pcoleuk@gmail.com> [b]To:[/b] mike castle mke.castle@yahoo.com> [b]Cc:[/b] MG-TABC List mg-tabc@yahoogroups.com> [b]Sent:[/b] Monday, September 9, 2013 12:05 PM [b]Subject:[/b] Re: [mg-tabc] Fuel Pump Mike, You haven't told us where the the leak was. Was it a brass based pump or a die cast pump? Peter On Sep 9, 2013 7:44 PM, "mike castle" mke.castle@yahoo.com> wrote: [u][/u] Any advise on sealants or tricks that can be used for the fuel pump. Was leaking tore it apart,cleaned installed a new gasket etc. Worked fine for about a day then started leaking again. Thanks, Mike
Fuel Pump
-
- Posts: 72
- Joined: Thu Nov 28, 2002 1:28 pm
Re: Fuel Pump
Tis true. I often get the answer but not the question. Very confusing!
Peter
-
- Posts: 57
- Joined: Thu Oct 09, 2014 10:05 pm
Re: Fuel Pump
It's an uncomfortable truth about the Internet....
Sent via telekinesis
hi Guys - I am mystified, not by the SU pump leaks, but by the internet...Peter's reply to Mike's (presumably) 2nd. email, arrived FIRST. Not only that, but Mike's 1st. email (on the 9th.) never graced my inbox. In fact, there was only one email (from Steve Steirman) on the 9th. and none on the 8th. In addition, I am STILL not getting copies of emails sent to the list, which is why, when I remember, they are Cc. to myself. I believe this happens to others on this list, and also on another I belong to. Any ideas??? cheers Roger Devon ----- Original Message ----- [b]From:[/b] mke.castle@yahoo.com [b]To:[/b] pcoleuk@gmail.com [b]Cc:[/b] mg-tabc@yahoogroups.com [b]Sent:[/b] Monday, September 09, 2013 9:07 PM [b]Subject:[/b] Re: [mg-tabc] Fuel Pump A die cast pump, It's hard to tell exactly where the leaks coming from but seems to be from the gasket flange and not the diaphram side. [b]From:[/b] Peter Cole pcoleuk@gmail.com> [b]To:[/b] mike castle mke.castle@yahoo.com> [b]Cc:[/b] MG-TABC List mg-tabc@yahoogroups.com> [b]Sent:[/b] Monday, September 9, 2013 12:05 PM [b]Subject:[/b] Re: [mg-tabc] Fuel Pump Mike, You haven't told us where the the leak was. Was it a brass based pump or a die cast pump? Peter On Sep 9, 2013 7:44 PM, "mike castle" mke.castle@yahoo.com> wrote: [u][/u] Any advise on sealants or tricks that can be used for the fuel pump. Was leaking tore it apart,cleaned installed a new gasket etc. Worked fine for about a day then started leaking again. Thanks, MikeOn Sep 11, 2013, at 8:38 AM, "Roger Furneaux" roger.46tc@virgin.net> wrote:
-
- Posts: 78
- Joined: Tue Nov 23, 2010 6:23 am
Re: Fuel Pump
Some servers are faster than others? i.e. volume related. -Bill [b]From:[/b] mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]Phil
[b]Sent:[/b] Wednesday, September 11, 2013 10:52 AM
[b]To:[/b] Roger Furneaux
[b]Cc:[/b] T-ABC; Roger Furneaux
[b]Subject:[/b] Re: [mg-tabc] Fuel Pump It's an uncomfortable truth about the Internet....
Sent via telekinesis
On Sep 11, 2013, at 8:38 AM, "Roger Furneaux" roger.46tc@virgin.net> wrote:
hi Guys - I am mystified, not by the SU pump leaks, but by the internet...Peter's reply to Mike's (presumably) 2nd. email, arrived FIRST. Not only that, but Mike's 1st. email (on the 9th.) never graced my inbox. In fact, there was only one email (from Steve Steirman) on the 9th. and none on the 8th. In addition, I am STILL not getting copies of emails sent to the list, which is why, when I remember, they are Cc. to myself. I believe this happens to others on this list, and also on another I belong to. Any ideas??? cheers RogerDevon----- Original Message ----- [b]From:[/b] mke.castle@yahoo.com [b]To:[/b] pcoleuk@gmail.com [b]Cc:[/b] mg-tabc@yahoogroups.com [b]Sent:[/b] Monday, September 09, 2013 9:07 PM[b]Subject:[/b] Re: [mg-tabc] Fuel Pump A die cast pump, It's hard to tell exactly where the leaks coming from but seems to be from the gasket flange and not the diaphram side. [b]From:[/b] Peter Cole pcoleuk@gmail.com> [b]To:[/b] mike castle mke.castle@yahoo.com> [b]Cc:[/b] MG-TABC List mg-tabc@yahoogroups.com> [b]Sent:[/b] Monday, September 9, 2013 12:05 PM [b]Subject:[/b] Re: [mg-tabc] Fuel Pump Mike, You haven't told us where the the leak was. Was it a brass based pump or a die cast pump?PeterOn Sep 9, 2013 7:44 PM, "mike castle" mke.castle@yahoo.com> wrote: Any advise on sealants or tricks that can be used for the fuel pump. Was leaking tore it apart,cleaned installed a new gasket etc. Worked fine for about a day then started leaking again. Thanks,Mike
-
- Posts: 17
- Joined: Mon Jul 13, 2009 4:48 am
Re: Fuel Pump
All I can say is God Bless The Internet and long may it reign! There are troubles of course and tons of garbage, harmful and not so harmful, just a nuisance, but we all know we would be lost without it. I am a telecom engineer and have worked the internet and related telecommunications connectivity since its early inception, and knowing just how complex the network(s) are helps to explain the explainable. Pack up your troubles in your old kit bag and smile, smile, smile. \\
Dennis Nelson Manssas, VA
On Wed, Sep 11, 2013 at 8:38 AM, Roger Furneaux roger.46tc@virgin.net> wrote: [u][/u] [u][/u] hi Guys - I am mystified, not by the SU pump leaks, but by the internet...Peter's reply to Mike's (presumably) 2nd. email, arrived FIRST. Not only that, but Mike's 1st. email (on the 9th.) never graced my inbox. In fact, there was only one email (from Steve Steirman) on the 9th. and none on the 8th. In addition, I am STILL not getting copies of emails sent to the list, which is why, when I remember, they are Cc. to myself. I believe this happens to others on this list, and also on another I belong to. Any ideas??? cheers Roger Devon ----- Original Message ----- [b]From:[/b] mke.castle@yahoo.com [b]To:[/b] pcoleuk@gmail.com [b]Cc:[/b] mg-tabc@yahoogroups.com [b]Sent:[/b] Monday, September 09, 2013 9:07 PM [b]Subject:[/b] Re: [mg-tabc] Fuel Pump A die cast pump, It's hard to tell exactly where the leaks coming from but seems to be from the gasket flange and not the diaphram side. [b]From:[/b] Peter Cole pcoleuk@gmail.com> [b]To:[/b] mike castle mke.castle@yahoo.com> [b]Cc:[/b] MG-TABC List mg-tabc@yahoogroups.com> [b]Sent:[/b] Monday, September 9, 2013 12:05 PM [b]Subject:[/b] Re: [mg-tabc] Fuel Pump Mike, You haven't told us where the the leak was. Was it a brass based pump or a die cast pump? Peter On Sep 9, 2013 7:44 PM, "mike castle" mke.castle@yahoo.com> wrote: [u][/u] Any advise on sealants or tricks that can be used for the fuel pump. Was leaking tore it apart,cleaned installed a new gasket etc. Worked fine for about a day then started leaking again. Thanks, Mike
-
- Posts: 3
- Joined: Fri Feb 03, 2012 10:14 pm
Re: Fuel Pump
It is very simple, there are organisations scanning, coping, reading, controlling our mails. It is like immigration control line in the air port. May be the one far behind you in que getting out first after control.You do not have to believe stupid me.The speed of Internet connection and the type of connection and the place of your access also plays a role. It is similar to motor ways, country road and private roads. The weather also plays a role. Munich October beer festival is very big fun. But the pick picketers and and many other crooked people are also present there, because they have more chance to get a pray. Same with Internet. Lot of cheering happening here.
Regards madhuparoor
Am 11.09.2013 um 15:29 schrieb Peter Cole pcoleuk@gmail.com>:
Tis true. I often get the answer but not the question. Very confusing! Peter On Sep 11, 2013 1:41 PM, "Roger Furneaux" roger.46tc@virgin.net> wrote: [u][/u] [u][/u] hi Guys - I am mystified, not by the SU pump leaks, but by the internet...Peter's reply to Mike's (presumably) 2nd. email, arrived FIRST. Not only that, but Mike's 1st. email (on the 9th.) never graced my inbox. In fact, there was only one email (from Steve Steirman) on the 9th. and none on the 8th. In addition, I am STILL not getting copies of emails sent to the list, which is why, when I remember, they are Cc. to myself. I believe this happens to others on this list, and also on another I belong to. Any ideas??? cheers Roger Devon
-
- Posts: 3
- Joined: Fri Aug 02, 2013 8:57 am
Re: Fuel Pump
If engineers built buildings the way computer technicians built the internet; the first woodpecker that came along would destroy civilization.
Phil Williams
MGTC, MGTD, MGYT, AH Sprite
Never try to teach a pig to dance ... It wastes your time, and it irritates the pig.
-
- Posts: 12
- Joined: Wed Dec 19, 2007 4:26 am
Re: Fuel Pump
Hi Phil,
Woodpeckers got a better built in shock absorber in the head than our TC shock absorber. So it is no wonder !!!
madhu
2013/9/12 Phil Williams Hawk.flyer@verizon.net>
[u][/u] If engineers built buildings the way computer technicians built the internet; the first woodpecker that came along would destroy civilization. Phil Williams MGTC, MGTD, MGYT, AH Sprite Never try to teach a pig to dance ... It wastes your time, and it irritates the pig.
-
- Posts: 2
- Joined: Fri Jan 07, 2005 7:02 am
Fuel Pump
Looking for the name of the gentleman who repairs fuel pumps, I think he is from Washington. Thanks, Jack Norton
[img]http://static.avast.com/emails/avast-mail-stamp.png[/img] This email is free from viruses and malware because avast! Antivirus protection is active.
-
- Posts: 215
- Joined: Tue Feb 01, 2000 4:09 pm
Re: Fuel Pump
Believe you maybe thinking of David Dubois : http://homepages.donobi.net/sufuelpumps/
Gene GillamSaucier, MSSent from my iPhone
Looking for the name of the gentleman who repairs fuel pumps, I think he is from Washington. Thanks, Jack Norton [img]http://static.avast.com/emails/avast-mail-stamp.png[/img] This email is free from viruses and malware because avast! Antivirus protection is active.On Jan 19, 2014, at 15:51, "Jack Norton" sevenpuddles@earthlink.net> wrote:
-
- Posts: 22
- Joined: Mon Feb 04, 2013 7:20 am
Re: Fuel pump
Did you check the filter on the bottom of the pump? If that is clear you need to do a step by step system approach. 1 - make sure there is fuel in the tank, 2 - pull the line from the pump to the carbs and see if it is pumping fuel to there. If so you may have stuck needles in carbs. Keep going through the system one step at a time. Ed In a message dated 5/21/2016 2:55:39 P.M. Eastern Daylight Time, mg-tabc-noreply@yahoogroups.com writes:
[/color][color=#000000] Hi, Sounds like you could be sucking air buddy! Easier for the pump to pull air than liquids. This sounds stupid but is there enough fuel in the tank? Check conections. If you have fuel and no leaks then you could have pump issues but from my location hard to diagnose. Chip Sent from my Verizon Wireless 4G LTE smartphone
Who is online
Users browsing this forum: No registered users and 10 guests