bajaworx windshield ( not really klr )

[Jeff Saline]

Listers, I think the other day someone was asking about potential issues on a 2009 KLR. I responded but just remembered one more. It's called the deep hole and is one of the starter gear shaft holes in the left side cover bored too deep. If the bike (I think maybe 2008-2009) has this problem the shaft can slip into the cover and the engine side of the shaft will not be supported. This is easily fixed by putting a ball bearing into the hole to keep the shaft from slipping into the hole. I also recall hearing a few people have put a short piece of hose into the hole. Serves the same function as the ball bearing. Maybe someone that has actually seen this issue can talk a bit more about it. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650 . . ____________________________________________________________ Better Than A Facelift? Doctor Reveals Lazy Way To Look Up To 15 Years Younger in 17 Seconds http://thirdpartyoffers.juno.com/TGL3141/50e1167cef32b167c5361st01vuc

[Luc Legrain]

LOL !! Here we go !!!! The Rev. started it ...... Oil fight !! Oil fight everybody !!! ________________________________ From: revmaaatin To: DSN_KLR650@yahoogroups.com Sent: Sunday, December 30, 2012 9:44 AM Subject: [DSN_KLR650] Re: Bajaworx Windshield ( Not really KLR ) What are they selling? Oil. Most likely Rotella 15/40. Secondary sales would be (sic) WD-40 chain lube. cough. revmaaatin.

--- In mailto:DSN_KLR650%40yahoogroups.com, mark ward wrote: > > It still amazes me, how many Million dollar ($1,000,000.00) comercials I see that at the end of car chases, Bombs going off, 95% nude's, ETC ETC ETC.......And I have NO idea what they are selling?? > > --- On Sat, 12/29/12, Luc Legrain wrote: > > > From: Luc Legrain > Subject: Re: [DSN_KLR650] Bajaworx Windshield ( Not really KLR ) > To: "Fred Hink" , "DSN KLR650" , "Desert Datsuns" > Date: Saturday, December 29, 2012, 5:06 PM > > > > > > > > I clicked on the link that Fred gave and Behold ... sure enough.. in the background there was a lady that seemed ready to ride, chaps, jacket ... . I never could figure out why at cars,bikes,boats,guns, races, any crowd gathering events you find ladies in bikinis,undies ,whatever. > Fred, would you have a girl pose this way in front of your store? do you feel you would attract more customers? what would you be selling ,meat or bike parts ? > ( Steady down pour here, can't ride.. Thought I would steer things up ...) > > > ________________________________ > From: Fred Hink > To: DSN KLR650 ; Desert Datsuns > Sent: Saturday, December 29, 2012 10:23 AM > Subject: Re: [DSN_KLR650] Bajaworx Windshield > > > > > Clearview makes some good windshields for your bike. They come in three different heights and tints. > http://clearviewshields.com/shop/product.php?id=303 > Clearview uses your stock windshield along with their taller windshield to help vent behind the windshield which will limit turbulence. There were some year end very slightly damaged models for sale if you would like to save a few bucks, let me know. > > Fred > http://www.arrowheadmotorsports.com > > From: Desert Datsuns > Sent: Saturday, December 29, 2012 9:18 AM > To: DSN KLR650 > Subject: Re: [DSN_KLR650] Bajaworx Windshield > > 2009. > > Ryan > Phoenix, AZ > > Fred Hink wrote: > > What year is your KLR? > > > > Fred > > http://www.arrowheadmotorsports.com/ > > > > *From:* Desert Datsuns > > *Sent:* Saturday, December 29, 2012 9:08 AM > > *To:* DSN KLR650 > > *Subject:* [DSN_KLR650] Bajaworx Windshield > > > > > > > > Wondering if anyone knows the status of the Bajaworx windshields. They > > have the look I want, but are listed as not being produced at the > > moment. Does anyone have more info about why they stopped, or when > > they'll be back? > > > > If I can't get one of those, what's the next best option? The Givi? I > > want something that pushes the air around the helmet, so the +2 and +5's > > I see out there are probably too short. Thanks. > > -- > > Ryan > > Phoenix, AZ > > > > > > > > No virus found in this message. > > Checked by AVG - http://www.avg.com/ http://www.avg.com> > > Version: 2012.0.2221 / Virus Database: 2637/5495 - Release Date: 12/29/12 > > > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > > > > > > > > [Non-text portions of this message have been removed] > [Non-text portions of this message have been removed]

[Desert Datsuns]

That was me, thanks for the tip. I'll add it to the list. Ryan Phoenix, AZ Jeff Saline wrote:

> > > Listers, > > I think the other day someone was asking about potential issues on a 2009 > KLR. I responded but just remembered one more. > > It's called the deep hole and is one of the starter gear shaft holes in > the left side cover bored too deep. If the bike (I think maybe > 2008-2009) has this problem the shaft can slip into the cover and the > engine side of the shaft will not be supported. This is easily fixed by > putting a ball bearing into the hole to keep the shaft from slipping into > the hole. I also recall hearing a few people have put a short piece of > hose into the hole. Serves the same function as the ball bearing. > > Maybe someone that has actually seen this issue can talk a bit more about > it. > > Best, > > Jeff Saline > ABC # 4412 South Dakota Airmarshal > Airheads Beemer Club www.airheads.org > The Beautiful Black Hills of South Dakota > 75 R90/6, 03 KLR650 > > . > . > __________________________________________________________ > Better Than A Facelift? > Doctor Reveals Lazy Way To Look Up To 15 Years Younger in 17 Seconds > http://thirdpartyoffers.juno.com/TGL3141/50e1167cef32b167c5361st01vuc > > > > No virus found in this message. > Checked by AVG - www.avg.com http://www.avg.com> > Version: 2012.0.2221 / Virus Database: 2637/5499 - Release Date: 12/31/12 >