--- On Wed, 12/5/12, greg coyle wrote:
From: greg coyle
Subject: Re: [Bulk] Re: [DSN_KLR650] A new trick I figured out
To:
Cc: "
DSN_KLR650@yahoogroups.com" DSN_KLR650@yahoogroups.com>
Date: Wednesday, December 5, 2012, 5:06 PM
yea and best position to push from:
seated using both feet
side saddle using one foot
or my personal favorite bob sled style from the side
ok, guess we'd better stop now...
gregc
On 12/5/2012 9:48 AM, mark ward wrote:
> Pushing?? We,ve done (& WILL DO) threads on Tire mileage, Now we need to
> do a.......... Soles of a Boot Mileage. LOL
>
> --- On *Wed, 12/5/12, greg coyle //* wrote:
>
>
> From: greg coyle
> Subject: Re: [Bulk] Re: [DSN_KLR650] A new trick I figured out
> To: "RobertWichert"
> Cc: "
DSN_KLR650@yahoogroups.com" DSN_KLR650@yahoogroups.com>
> Date: Wednesday, December 5, 2012, 4:36 PM
>
> just givin you the gears robert
> yea, we should all just forget startin our motors and just push em
> around...maybe we're onto something...
> gregc
>
> On 12/5/2012 9:28 AM, RobertWichert wrote:
> > No thank you. I always go as far as possible and then push it the
> last
> > few yards. Those last few yards I get GREAT mileage.
> >
> > Robert Wichert P.Eng. LEED AP BD&C
> > +1 916 966 9060
> > FAX +1 916 966 9068
> >
> > ===============================================
> >
> > On 12/5/2012 8:07 AM, greg coyle wrote:
> > >
> > > just a thought, but since our klr's get very consistent gas mileage
> > > maybe you could just fill up before you need to hit reserve...
> imho...
> > > gregc
> > >
> > > On 12/5/2012 8:48 AM, RobertWichert wrote:
> > > > Stock everything. Happens only on the freeway at high revs.
> > > >
> > > > So..... Stock valve and YES.
> > > >
> > > > Robert Wichert P.Eng. LEED AP BD&C
> > > > +1 916 966 9060
> > > > FAX +1 916 966 9068
> > > >
> > > > ===============================================
> > > >
> > > > On 12/5/2012 7:40 AM, mark ward wrote:
> > > > >
> > > > > research time, who has this issue, 2 TWO groups.
> > > > >
> > > > > Do you have the shutoff "valve kit" installed??
> > > > >
> > > > > I do NOT have the kit, and have never had the issue, of
> needing to
> > > > > pull over. (unless riding very slow aproching a light etc.)
> > > > >
> > > > > SO......... Stock valve & NO.
> > > > >
> > > > >
> > > > > PS. I am INQUISITIVE,..... NOT JUDGING the kit.
> > > > >
> > > > > Mark (West MI.)
> > > > >
> > > > > --- On Wed, 12/5/12, RobertWichert http://us.mc814.mail.yahoo.com/mc/compose?to=robert%40wichert.org>
> >
> > >
> > > >
> > > > > > wrote:
> > > > >
> > > > > From: RobertWichert http://us.mc814.mail.yahoo.com/mc/compose?to=robert%40wichert.org>
> >
> > >
> > > > >
> > > > > Subject: [DSN_KLR650] A new trick I figured out
> > > > > To:
> > > > > Cc: "
DSN_KLR650@yahoogroups.com
> http://us.mc814.mail.yahoo.com/mc/compose?to=DSN_KLR650%40yahoogroups.com>
> >
> > >
> > >
> > > > "
> > > > > DSN_KLR650@yahoogroups.com
> http://us.mc814.mail.yahoo.com/mc/compose?to=DSN_KLR650%40yahoogroups.com>
>
> >
> > >
> > > > >
> > > > > Date: Wednesday, December 5, 2012, 3:11 PM
> > > > >
> > > > >
> > > > >
> > > > > But maybe everybody knows about it...
> > > > >
> > > > > It used to be that whenever I ran out of gas on the
> freeway, the bike
> > > > > would stall. Even if I switched to reserve as fast as I
> could, it
> > > would
> > > > > stall. I ride at about 6,000 RPM on the freeway, so maybe
> that has
> > > > > something to do with it, but it would always stall. I would
> have to
> > > > > coast to the side of the freeway (not fun on either side)
> and restart
> > > > > it. Using the enricher (choke) helped to get it started. It
> ran OK to
> > > > > the gas station after that.
> > > > >
> > > > > BUT THEN THE EPIPHANY!
> > > > >
> > > > > Yesterday I switched to reserve and also pushed the enrichener
> > (choke)
> > > > > to full rich (choked) at the same time. VOILA! No stall.
> > > > >
> > > > > Worked once, anyway.
> > > > >
> > > > > Robert Wichert P.Eng. LEED AP BD&C
> > > > > +1 916 966 9060
> > > > > FAX +1 916 966 9068
> > > > >
> > > > > ===============================================
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
>
[Non-text portions of this message have been removed]