Wilsons Sandbox

On 8/7/2012 10:30 AM, Roger Dill wrote: > Or, check the switch on the kick stand, it may be frozen in. > > On Mon, Aug 6, 2012 at 5:24 PM, RobertWichert > wrote: > > Kill switch must be UP/ON. > > Try putting up the kickstand. > > Put it in neutral. > > No go? I'd start with the relay. > > > > Robert P. Wichert P.Eng. LEED AP BD&C > +1 916 966 9060 > FAX +1 916 966 9068 > > On Aug 6, 2012, at 2:54 PM, Tom Tyler > wrote: > > > zippy tom, I have a 1995 klr650, my buddy said i need to be more > detailed in my post, my bike will not turn over no noise to the > starter, all light work, horn, but no cranking, have tried what > you guys told me, but no work. what should i do next, thanks again > group. tom > > > > [Non-text portions of this message have been removed] > > > > > > [Non-text portions of this message have been removed] > > > > > > > -- > Roger Dill > Innovative Financial Solutions > 210-681-1848 T > 866-831-4661 F > > This e-mail, along with any attachments, is intended solely for use by > the individual to whom it is addressed and may contain confidential > information. If the reader of this e-mail is not the addressed > recipient, you are hereby notified that printing, copying, > dissemination or use of any information contained in or attached to > this e-mail is strictly prohibited. If you have received this e-mail > in error, please contact the sender by reply e-mail and destroy all > copies of the original message. > [Non-text portions of this message have been removed]

--- In DSN_KLR650@yahoogroups.com, "Jud" wrote: > > > > Check your kill switch. Check your starter solenoid, both the 10 Ga. connections to battery and starter, but also the white nylon plug for the trigger circuit. (My next best guess is that plug got dislodged.) Check the battery connections and ground as well as the starter ground. If that does not cure it, go back to the wiring on the RH grip, kill switch and starter button, looking for someplace that wiring could have disconnected or pinched during the work with the handlebars. > > > --- In DSN_KLR650@yahoogroups.com, Tom Tyler wrote: > > > > zippy tom, I have a 1995 klr650, my buddy said i need to be more detailed in my post, my bike will not turn over no noise to the starter, all light work, horn, but no cranking, have tried what you guys told me, but no work. what should i do next, thanks again group. tom > > > > [Non-text portions of this message have been removed] > > >

--- On Tue, 8/7/12, W wrote: From: W Subject: [DSN_KLR650] wiring diagram for just the starter circuit To: DSN_KLR650@yahoogroups.com Date: Tuesday, August 7, 2012, 3:29 PM Does anyone have a wiring diagram for just the starter circuit? Tom & I have a full bike schematic, but it makes our head hurt to look at it. lol With a diagram of just the starter circuit, I think we can trace this down, and it will be a simple fix. I agree, it probably happened when we were wrestleing with getting the handlebars set in the RoxRisers, but would like to check the whole circuit to make sure all is good. Thx, Warren --- In DSN_KLR650@yahoogroups.com, "Jud" wrote: > > > > Check your kill switch. Check your starter solenoid, both the 10 Ga. connections to battery and starter, but also the white nylon plug for the trigger circuit. (My next best guess is that plug got dislodged.) Check the battery connections and ground as well as the starter ground. If that does not cure it, go back to the wiring on the RH grip, kill switch and starter button, looking for someplace that wiring could have disconnected or pinched during the work with the handlebars. > > > --- In DSN_KLR650@yahoogroups.com, Tom Tyler wrote: > > > > zippy tom, I have a 1995 klr650, my buddy said i need to be more detailed in my post, my bike will not turn over no noise to the starter, all light work, horn, but no cranking, have tried what you guys told me, but no work. what should i do next, thanks again group. tom > > > > [Non-text portions of this message have been removed] > > > [Non-text portions of this message have been removed]