95 wont start

[Mike Huber]

Tom, Pull off the wiring cover behind the speedo and make sure all those plugs are plugged in properly and all the wires are fully seated in them.... My 06 would die when I turned the bars all the way to the right....One of the wires was partially pulled out of the plug.... It's also a good time to clean and shoot some dielectric grease in them.... Mike Huber Carlsbad NM To: DSN_KLR650@yahoogroups.com From: judjonzz@... Date: Mon, 6 Aug 2012 02:04:15 +0000 Subject: [DSN_KLR650] Re: 95 wont start The starter cranks the engine over, right? If not, check the kill switch.

--- In DSN_KLR650@yahoogroups.com, "Jud" wrote: > > Assuming the bike started fine before you did the work, look for things that could have been disturbed by the work. The first thing that comes to mind is your start enricher. Did the cable become dislodged somehow? Did you have the tank off? Check the petcock vacuum line. > > > --- In DSN_KLR650@yahoogroups.com, "Tom" wrote: > > > > hello I am newbee on this site please help.. I replace my front springs and added rox riserand now the bike wouldn't start. the neutral light is on and clucth is in all lights work it appear all bypass look like there done, need some help thanks tom > > > [Non-text portions of this message have been removed]