led aux. lights

[Brent Tegler]

Hi All, I need to re-build the rear shock on my Tenagi and at the same time I would like to replace the front fork springs Questions: 1. Is the Shock Seal Head Kit for the KLR650 compatible? 2. Are the Progressive Front Fork Springs for the KLR650 compatible? I am looking at parts on http://www.procycle.us/bikepages/klr650.html Thanks, Brent.

[Jud]

I'm gonna say yes and yes. The fork springs should have an 1151 in the part number.

--- In DSN_KLR650@yahoogroups.com, "Brent Tegler" wrote: > > Hi All, > > I need to re-build the rear shock on my Tenagi and at the same time I > would like to replace the front fork springs > > Questions: > > 1. Is the Shock Seal Head Kit for the KLR650 compatible? > > 2. Are the Progressive Front Fork Springs for the KLR650 compatible? > > I am looking at parts on http://www.procycle.us/bikepages/klr650.html > > Thanks, Brent. >

[David Nichols]

For a shock rebuild, you can't beat Top Gun. $107 using existing spring, or $186.50 with a new spring. http://www.topgunmotorcycles.com/Product_Pages/klrprod2.html%c2%a0 ________________________________ From: Jud To: DSN_KLR650@yahoogroups.com Sent: Wednesday, June 20, 2012 2:04 PM Subject: [DSN_KLR650] Re: Tengai suspension specs I'm gonna say yes and yes. The fork springs should have an 1151 in the part number.

--- In DSN_KLR650@yahoogroups.com, "Brent Tegler" wrote: > > Hi All, > > I need to re-build the rear shock on my Tenagi and at the same time I > would like to replace the front fork springs > > Questions: > > 1. Is the Shock Seal Head Kit for the KLR650 compatible? > > 2. Are the Progressive Front Fork Springs for the KLR650 compatible? > > I am looking at parts on http://www.procycle.us/bikepages/klr650.html > > Thanks, Brent. > [Non-text portions of this message have been removed]

[David Nichols]

Oh, and here's a great bracket you can make to mount those LED lights to your lower triple clamp using the 4 fender bolts. All you'd need is a drill and a band saw, and maybe not even a band saw if you're handy with a file and a hack saw. He gives you a template you can print on an 8 1/2 x 11 sheet of paper. http://advwisdom.hogranch.com/Wisdom/KLR650%20DIY%20LED%20Auxiliary%20Lights.html%c2%a0 ________________________________ From: David Nichols To: Gillette Jeffrey ; KLR Group DSN_KLR650@yahoogroups.com> Sent: Wednesday, June 20, 2012 2:51 PM Subject: Re: [DSN_KLR650] LED Aux. Lights Yep, and the Model 30 at $60 each is as bright (1,500 lumens) or brighter than all those expensive ones. The Model 44 at 2,000 lumens and the Model 60 at 3,600 lumens will sear your retinas! But they still use relatively low power because they are LED's. Get the rotary dimmer with the high beam bypass for them... ________________________________ From: Gillette Jeffrey To: David Nichols Sent: Wednesday, June 20, 2012 2:38 PM Subject: Re: [DSN_KLR650] LED Aux. Lights at least most of those aren't a total rip off like most moto aux. led lighting ________________________________ From: David Nichols To: Jeffrey ; "DSN_KLR650@yahoogroups.com" DSN_KLR650@yahoogroups.com> Sent: Wednesday, June 20, 2012 12:36 PM Subject: Re: [DSN_KLR650] LED Aux. Lights I have read some good things about these lights: ADVMonster LED lights. http://stores.intuitwebsites.com/hstrial-QualiRegResou/-strse-LED-Lights/Categories.bok Thread on ADVRider: http://advrider.com/forums/showthread.php?t=607184 ________________________________ From: Jeffrey To: DSN_KLR650@yahoogroups.com Sent: Wednesday, June 20, 2012 2:30 PM Subject: [DSN_KLR650] LED Aux. Lights VisionX Solstice 10 Watt LED Light Qty: $119.95 Each 10 watt Solstice Solo produces 900 lumens. Roughly equal to a 50 watt halogen bulb. These are the brightest LED off road lamps on the market. The rugged and compact 2" x 2" square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod. Includes stainless steel mounting bracket and waterproof connection. The Elliptical pattern is wide and flat. Sold each. Equinox LED Lights from Trail Tech Qty: $249.95 Complete kit includes TWO 35mm post mount LED lights, fused wiring harness and waterproof button switch. Each 12 watt light has a high-medium-low button switch on the back of the housing. Rated at 800 lumens at full output. Spot type beam pattern. 12V DC 10W Cool White LED Wall Pack Wash Flood Light Outdoor Rugged, Corrosion-resistant, Die Casting Aluminum housing sealed to inhibit the entrance of contaminants. $17 PRICE Specification: Power Usage 10 Watts LED Emitter 9 dies in a single package LED Color Cool White Color Temperature 6000 - 7000 Kelvin (Day light) Total Output Lumens 750 / 900 Lumens Input Voltage Range 12V to 24V DC (Auto-Switch) Operating Temperature -40 F ~ 140 F Beam Angle 120 Shell Material High Strength Aluminum Cover Material 5mm High Strength Glassess Waterproof IP65 Life Span > 60,000 Hours Dimension 4.488" (W) x 3.386" (H) x 3.465" (D) Wiring Brown - Positive; Blue - Negative; Yellow - N/A 12V DC 20W WhiteLED Outdoor Flood Light Wall Wash Light lamp in BLACK HOUSING PRICE $40 Specification: - Shell Material : High Strength Aluminum ( BLACK COLOR ) - Cover Material: 5mm High Strength Glass - LED Emitter: 20WLED chip - Beam Angle: 140 - Intensity Luminous: 1600LM - Color Temp: 6000~7000K (Cool White) - Work Voltage : 12V - 24V DC - Waterproof: IP68 - LifeSpan Time : > 60,000 hours - Dimensions : 180mm(7.087")(W) x 140mm(5.512")(H) x 110mm(4.331)(D) [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

[Jud]

Most riders could probably use a stiffer spring. That 288 lb/in stock spring is not up to the task of supporting a 200-lb-plus rider and gear. The rebuild is not too tough, but that is not a bad price. I'd be a bit hesitant to go with Top Gun because of their history of shilling for their products on this forum and others. Although that was pretty much in the past, the bad taste lingers.

--- In DSN_KLR650@yahoogroups.com, David Nichols wrote: > > For a shock rebuild, you can't beat Top Gun. $107 using existing spring, or $186.50 with a new spring. > http://www.topgunmotorcycles.com/Product_Pages/klrprod2.html%c3%82%c2%a0 > > > ________________________________ > From: Jud > To: DSN_KLR650@yahoogroups.com > Sent: Wednesday, June 20, 2012 2:04 PM > Subject: [DSN_KLR650] Re: Tengai suspension specs > > > > I'm gonna say yes and yes. The fork springs should have an 1151 in the part number. > > --- In DSN_KLR650@yahoogroups.com, "Brent Tegler" wrote: > > > > Hi All, > > > > I need to re-build the rear shock on my Tenagi and at the same time I > > would like to replace the front fork springs > > > > Questions: > > > > 1. Is the Shock Seal Head Kit for the KLR650 compatible? > > > > 2. Are the Progressive Front Fork Springs for the KLR650 compatible? > > > > I am looking at parts on http://www.procycle.us/bikepages/klr650.html > > > > Thanks, Brent. > > > > > > > [Non-text portions of this message have been removed] >

[Brent Tegler]

Hey Jud, Thanks for the reply, I have heard the front fork springs are shorter on the Tengai and rear shock lower so it would be great to hear from another Tengai rider who has done suspension work! Good tip on the stock spring, hadn't thought of that! Cheers, Brent. -----Original Message----- From: DSN_KLR650@yahoogroups.com [mailto:DSN_KLR650@yahoogroups.com] On Behalf Of Jud Sent: June-20-12 4:01 PM To: DSN_KLR650@yahoogroups.com Subject: [DSN_KLR650] Re: Tengai suspension specs Most riders could probably use a stiffer spring. That 288 lb/in stock spring is not up to the task of supporting a 200-lb-plus rider and gear. The rebuild is not too tough, but that is not a bad price. I'd be a bit hesitant to go with Top Gun because of their history of shilling for their products on this forum and others. Although that was pretty much in the past, the bad taste lingers.

--- In DSN_KLR650@yahoogroups.com , David Nichols wrote: > > For a shock rebuild, you can't beat Top Gun. $107 using existing spring, or $186.50 with a new spring. > http://www.topgunmotorcycles.com/Product_Pages/klrprod2.html%c3%82 > > > ________________________________ > From: Jud > To: DSN_KLR650@yahoogroups.com > Sent: Wednesday, June 20, 2012 2:04 PM > Subject: [DSN_KLR650] Re: Tengai suspension specs > > > > I'm gonna say yes and yes. The fork springs should have an 1151 in the part number. > > --- In DSN_KLR650@yahoogroups.com , "Brent Tegler" wrote: > > > > Hi All, > > > > I need to re-build the rear shock on my Tenagi and at the same time I > > would like to replace the front fork springs > > > > Questions: > > > > 1. Is the Shock Seal Head Kit for the KLR650 compatible? > > > > 2. Are the Progressive Front Fork Springs for the KLR650 compatible? > > > > I am looking at parts on http://www.procycle.us/bikepages/klr650.html > > > > Thanks, Brent. > > > > > > > [Non-text portions of this message have been removed] >

[Jud]

I have heard that, too, But I doubt the B-model forks are more than 2 inches shorter than the A. The 1151 takes a 2-inch spacer in the A model, which many owners lengthen to as much as 2 3/4" for more preload. Presumably the Tengai would simply take a shorter spacer, which is why I feel comfortable in going out on a limb to suggest the B probably takes the same spring. As to the rear shock, I'd venture that the distance between spring perches is the same, so that any spring that works on the A would work on the B. Once again, out on a limb, but not too nervous about it. Wait for Mark Van Horn for the last word. In any case, the replacement springs for the KLR invariably have a free length of 9", as opposed to 10" for the stock spring. The stock one is under a lot of preload, which BTW requires a lot of caution with some spring compressors.

--- In DSN_KLR650@yahoogroups.com, "Brent Tegler" wrote: > > Hey Jud, > > Thanks for the reply, I have heard the front fork springs are shorter on the Tengai and rear shock lower so it would be great to hear from another Tengai rider who has done suspension work! > > Good tip on the stock spring, hadn't thought of that! > > Cheers, Brent. > > -----Original Message----- > From: DSN_KLR650@yahoogroups.com [mailto:DSN_KLR650@yahoogroups.com] On Behalf Of Jud > Sent: June-20-12 4:01 PM > To: DSN_KLR650@yahoogroups.com > Subject: [DSN_KLR650] Re: Tengai suspension specs > > > > Most riders could probably use a stiffer spring. That 288 lb/in stock spring is not up to the task of supporting a 200-lb-plus rider and gear. The rebuild is not too tough, but that is not a bad price. I'd be a bit hesitant to go with Top Gun because of their history of shilling for their products on this forum and others. Although that was pretty much in the past, the bad taste lingers. > > --- In DSN_KLR650@yahoogroups.com , David Nichols wrote: > > > > For a shock rebuild, you can't beat Top Gun. $107 using existing spring, or $186.50 with a new spring. > > http://www.topgunmotorcycles.com/Product_Pages/klrprod2.html%c3%82 > > > > > > ________________________________ > > From: Jud > > To: DSN_KLR650@yahoogroups.com > > Sent: Wednesday, June 20, 2012 2:04 PM > > Subject: [DSN_KLR650] Re: Tengai suspension specs > > > > > > > > I'm gonna say yes and yes. The fork springs should have an 1151 in the part number. > > > > --- In DSN_KLR650@yahoogroups.com , "Brent Tegler" wrote: > > > > > > Hi All, > > > > > > I need to re-build the rear shock on my Tenagi and at the same time I > > > would like to replace the front fork springs > > > > > > Questions: > > > > > > 1. Is the Shock Seal Head Kit for the KLR650 compatible? > > > > > > 2. Are the Progressive Front Fork Springs for the KLR650 compatible? > > > > > > I am looking at parts on http://www.procycle.us/bikepages/klr650.html > > > > > > Thanks, Brent. > > > > > > > > > > > > > [Non-text portions of this message have been removed] > > >