Page 1 of 1
"ring cotter" (was "a klr review video")
Posted: Tue Jun 12, 2012 8:01 pm
by James W. Flower
Why the 3/4" size? The axles are 1/2" and 5/8" diameters (front and rear)?
"ring cotter" (was "a klr review video")
Posted: Tue Jun 12, 2012 8:51 pm
by Ron Haraseth
Based on the castellated nut size. the ring part fits over the nut, not the
axle.
Picture:
http://sdrv.ms/MBTOof
-----Original Message-----
From: James W. Flower
Sent: Tuesday, June 12, 2012 5:47 PM
To:
DSN_KLR650@yahoogroups.com
Subject: [DSN_KLR650] Re: "ring cotter" (was "A KLR review video")
Why the 3/4" size? The axles are 1/2" and 5/8" diameters (front and rear)?
"ring cotter" (was "a klr review video")
Posted: Tue Jun 12, 2012 9:02 pm
by Shane
Not sure what price the group has found these, but I use OMC Tilt Trim pin clips for my customers. They are good quality stainless to boot. They fit perfectly as well.
--- In
DSN_KLR650@yahoogroups.com, Ron Haraseth wrote:
>
> Based on the castellated nut size. the ring part fits over the nut, not the
> axle.
> Picture:
http://sdrv.ms/MBTOof
>
> -----Original Message-----
> From: James W. Flower
> Sent: Tuesday, June 12, 2012 5:47 PM
> To:
DSN_KLR650@yahoogroups.com
> Subject: [DSN_KLR650] Re: "ring cotter" (was "A KLR review video")
>
> Why the 3/4" size? The axles are 1/2" and 5/8" diameters (front and rear)?
>
"ring cotter" (was "a klr review video")
Posted: Tue Jun 12, 2012 10:06 pm
by Mike Huber
I've been using these since I bought my 06 4 years ago....haven't lost one yet.
http://www.ebay.com/itm/Kawasaki-KLR-650-KLR650-Axle-Safety-Clip-Axles-Cotter-Pin-Wheel-New-1987-2012-/280889058537?pt=Motorcycles_Parts_Accessories&hash=item41664ae4e9&vxp=mtr
Mike Huber
Carlsbad NM
To:
DSN_KLR650@yahoogroups.com
From: twrecks2@...
Date: Wed, 13 Jun 2012 02:02:42 +0000
Subject: [DSN_KLR650] Re: "ring cotter" (was "A KLR review video")
Not sure what price the group has found these, but I use OMC Tilt Trim pin clips for my customers. They are good quality stainless to boot. They fit perfectly as well.
--- In
DSN_KLR650@yahoogroups.com, Ron Haraseth wrote:
>
> Based on the castellated nut size. the ring part fits over the nut, not the
> axle.
> Picture:
http://sdrv.ms/MBTOof
>
> -----Original Message-----
> From: James W. Flower
> Sent: Tuesday, June 12, 2012 5:47 PM
> To:
DSN_KLR650@yahoogroups.com
> Subject: [DSN_KLR650] Re: "ring cotter" (was "A KLR review video")
>
> Why the 3/4" size? The axles are 1/2" and 5/8" diameters (front and rear)?
>
[Non-text portions of this message have been removed]
nklr stuff that makes you go "huh?"
Posted: Tue Jun 12, 2012 10:25 pm
by Eddie
The taxi aspect, I get.
But, the sign on the wall in McDonalds is a written one.
A blind person or an illiterate person have no idea what it says without
help.
If either walk in alone, I wonder if the person working the counter would
remember the sign is behind them.
eddie
> [Original Message]
> From: mark ward
> Not ment to be mean But show respect.
>
> A blind person traveling with a friend OR IN A TAXI, can use the ATM with
out sharing there pin#.
>
> And CAN read the Menu without having to feel like a child having it read
to them.
> OR if they walk in alone they can SHOW the casher what they want, the
prices etc..
>
>
>